General Tech The Mango Bastard - A Rockwell Buggy story

neagtea

Well-Known Member
Supporting Member
Location
farmington
Here’s a friends jimmys with Rockwell’s 47” ltb’s ls3 etc etc.
 

Attachments

  • 71058BE8-5AE3-460F-ACDC-6D0403BA7172.jpeg
    71058BE8-5AE3-460F-ACDC-6D0403BA7172.jpeg
    491.4 KB · Views: 55
  • A11E084F-E1C3-48AE-8746-E5F5222D586C.jpeg
    A11E084F-E1C3-48AE-8746-E5F5222D586C.jpeg
    485.6 KB · Views: 52

_Auzzy_

Current Rig: 12W Boots
Location
Richfield Utah
Little KOH prep going on around the shop.

List on mine:

*Switched out orbital, 185ml to 250ml
*Get dual normal whip and led flag mounts on
* Fix some bolt holes on my rear driver side upper kingpin.
*Added two speakers to my system
*Fix wiring for trans fans
*Check all fluids
*Check all suspension
*Check lugnuts
*Check over frame welds
*add Band-Aids to panel ouchies.

Pics of speakers install. Kinda pain cause the amp/receiver are under the dash.
received_601146977370612.jpeg
*
received_620160042072912.jpeg
*
received_893043567781209.jpeg


Also the new orbital I got from Rockwell Off-road.

received_2617802091781667.jpeg


Whips on and it all lit up

received_516386545648470.jpeg


And also cruised to the Wendies for some spicy chicken nuggets

received_1044966392524510.jpeg

Then here's a random cool shot my bud Chad got while we were out goofing around

received_487105718588878.jpeg
 

YROC FAB.

BUGGY TIME
Location
Richfield, UT.
Chasing water falls. The band TLC....EFF, I FEEL OLD

My reference was to the band TLC but im not familiar with "avenging left eye". I only know the dont go chasing water fall reference from the move "The other guys". I though the left eye was some legendary obstacle that denied you lol.
 

_Auzzy_

Current Rig: 12W Boots
Location
Richfield Utah
was a damn good time

This last double ledge really isn't justified by these shots. Big under cut on the driver side i kept dragging against and tires wedged under, then climb up the passenger side forcing you to lean into the wall.

received_561905204507187.jpeg

received_285999182592485.jpeg

Coming down it. Not a clue why it likes to die at random but its getting pretty annoying

 

_Auzzy_

Current Rig: 12W Boots
Location
Richfield Utah
It was a tiring day okay lol

Anywho...
Got the new flexplate in, oil leaks sealed back up on the trans and motors oil pans, washed all the oil off it, reinstalled everything and walla it works good enough

I originally wanted the ati billet flexplate but sadly they weren't in stock so I settled for this summit one.
20200808_220432.jpg

And everything back in and clean mmm

20200809_060222.jpg
 

_Auzzy_

Current Rig: 12W Boots
Location
Richfield Utah
Parts are rolling in! New intake showed up the other day, these are actually very well built, feel solid, welds look good and seals etc looked good too! Went with this manifold for a variety of reasons. The main one being it's shorter than the factory manifold by a good 1.5"s which with how tall the factory setup is, measured from the crank bolt to the top of the manifold, the 6.0s is nearly as tall as my 454 from crank to the top of the air filter. Being that way there isn't alot of room between the manifold and the engine cage. If something was to happen, roll over, tree branch etc there'd be a slight chance for it to be damaged. But now that risk is slightly less. Second reason being the cheapness of it. Got it for less than $400 and it came with fuel rails etc. 3rd being the slight performance gain, saw a dynamic test with one of these, nothing huge gained, +12hp and +17torque. Not really enough to notice but hey it helps. 4th being it's shiny and my adhd likes that kinda thing.

20210120_183436.jpg

Lil fisting action to compare the factory TB to the new 102mm
20210120_183457.jpg

20210120_183450.jpg

Next engine add on is the car oil pan for clearance. Got this Chinese knock off of a car pan, seems like it's actually a good casting, flange is thick, casting is smooth, holes and bolt head recesses are all good and align with a factory gasket, and it even has a cool oil catch built in. Cost was $100

20210120_184230.jpg

20210120_184237.jpg

I have a bunch of small goodies too for it like an oil pump, some stuff from ict billet, etc too not pictured but yall will see it when I get the motor assembled. Also ordered a set of trail worthy fab 17 inch double beadlocks to mount the 43s on, hopefully they ship here soon too
 
Last edited:
Top