Work Boots

UNSTUCK

But stuck more often.
One of my most used tools, and I'm getting sick and tired of trying to find a good pair.

The company I work for gives us $100/year for boots. My goal is to come up with something that lasts at least that long. Per the rules, my boots must have a "heel" (questionable?) and must be a safety toe. After that I look for the lightest weight boot I can find. Once I find the two lightest weight boots I try them on and usually pick the cheaper one. I can't believe how heavy some boots are and can't imagine dragging my feet around in heavy boots all day long. I work 10-12 hour days, 5-6 days a week. 75% concrete floors, 25% out in the dirt/mud/rock. I never take them home. Swap in and out of them at work. Here's the results for the last several years:

2016: Wolverine Cirrus Alloy Toe $101.50

2017: Wolverine Cirrus Alloy Toe $66.78 (on sale)
The Wolverine Cirrus is by far the best boot I've worn. I probably bought 10 pairs of these in a row. They were exclusively made for Sears and now I can't find them anymore. At the end of most years they were very well worn, but I could still wear them easily. I really was heartbroken when I couldn't find them anymore.

2018: Redwing Chukka Aluminum Toe $170.95
The worst boot I've used. Hands down. Started falling apart at 6 months with stitching coming undone. It was a real struggle to make them last the year. They were basically shredded by the year mark. You could see my socks through holes in them. These were probably the cheapest Redwing boots there, but I still expected more from them.

2019: Timberland Flume Alloy Toe $107.44
Timberland makes heavy boots. Too heavy for my liking. This was lightest pair out of all of them that I saw. To be honest I don't really remember this pair. I guess that means they didn't stand out and great or terrible. I purchased my next boots 11 months later so I guess I couldn't make the year mark with them.

2020: Work Zone S651 Steel Toe (2 Pairs) $71.29 each
I really went out on a limb with these boots. I used to work with a guy that swore by using two pairs of boots. I found these and decided to try it. These have been the most uncomfortable pair. Or at least it took the longest to get my feet "used" to them. I would say they were well broken in before my feet stopped rubbing wrong causing irritation. These had a very strange cut out in the leather right at the ankle. It offered great flex, but lost all ankle support.
I labeled a pair #1 and the other pair #2. I was religious about using them every other day. 1 on the odd days and 2 on the evens. To me it was very interesting that they wore exactly the same. I guess they should have, but I didn't think they would. Stitching started coming undone at the same time. Yesterday I broke a lace on pair 1 while tying them in the morning. I took them off and grabbed pair 2. Later on I noticed that I broke a lace on these. Overall I was disappointed in the boots. They were the most uncomfortable boots and in reality they lasted 6 months. I really did like swapping boots every other day though. Gave them plenty of time to dry out when they got wet. Having a back up pair was nice, but not really needed. I would do this again over the Redwings though.

2021: Hoss Carter Steel Toe $107.69
I went in looking for replacement laces for the ones I broke yesterday, then realized I was at my year mark so I started looking. The store was closing in 10 minutes. The guys were nice, but I know they didn't want me there. Again, I found the two lightest weight boots and tried them both on. They both felt fine. At $40 difference in price, I picked the cheaper pair. I've never heard of these before so no idea what I'm getting myself into.

So, have you guys found a boot you love? Anyone getting more than a year out of a pair with constant use? Do I just need to accept that they are all junk?
 

85CUCVKRAWLER

Active Member
Location
Tooele
I would highly, highly suggest the Timberland Pro 6"

here

Its a great all around boot and has a classy look to them. Im on my second pair ive been wearing for 5 years!! Steel toe, electrical rated, non-slip, water proof. Not a heavy boot either. Works really well on concrete. I used to walk 5 miles a day carrying a heavy backpack and a ladder on my shoulder. Honestly my 5 year old ones need replaced.

Ive had alot of the top brands to wear and the Tim Pros are the best by far. Wolverine, Carolina, Throughgood, Ariat. All of them fail in some way, mostly by being super uncomfortable or look like a massive billboard. I am about to throw out a set of $200 Ariat boots since they arent comfortable after about 3 hours.

EDIT: This is the exact model i have that has lasted twice, for over three years each

here
 
Last edited:

str8axleguy

Registered User
Location
Ogden, UT
Best work boot I’ve found that’s comfortable and light is the danner quarry. They are a great boot that last well for me. I work ten our days for the railroad usually 8 days in a row. Mine usually hold up a year and a half to two years. I’ve liked all the Danner boots I’ve tried but they are kinda pricey.
 

SoopaHick

Certified Weld Judger
Moderator
Depending on if you prefer lace up vs pull on I fell in love with the Ariat Workhog with the mesh breather on the calf. Due to the welding aspect I switched from lace up because I kept burning through them. Along with that I developed some athletes foot that was impossible to get around when my job requires all leather safety toe boots. The breather mesh on the calf saved my feet. I think I've had these for about 2 1/2 years and they are starting to near their end. I do work about half as much as you though so maybe that'll equate to a years worth of use.

And to add, they are currently my most comfortable pair of shoes that I've ever worn.

Around $200 if I remember correctly.
 

UNSTUCK

But stuck more often.
I wish I could get my company to give me $200 for a two year period. I'd like to try a higher end boot to see if it holds up longer. I haven't considered a pull on boot vs lace up. I have lots of laces ruined from welding. That brings me to another point. An all leather tongue vs a fabric tongue is much better. I have scars on the tops of my feet from melt through.

Do the pull on boots still hold your foot tight, or do you feel your foot sliding/moving around? I like a pretty tight boot.
 

UNSTUCK

But stuck more often.
I would highly, highly suggest the Timberland Pro 6"

here

Its a great all around boot and has a classy look to them. Im on my second pair ive been wearing for 5 years!! Steel toe, electrical rated, non-slip, water proof. Not a heavy boot either. Works really well on concrete. I used to walk 5 miles a day carrying a heavy backpack and a ladder on my shoulder. Honestly my 5 year old ones need replaced.

Ive had alot of the top brands to wear and the Tim Pros are the best by far. Wolverine, Carolina, Throughgood, Ariat. All of them fail in some way, mostly by being super uncomfortable or look like a massive billboard. I am about to throw out a set of $200 Ariat boots since they arent comfortable after about 3 hours.

EDIT: This is the exact model i have that has lasted twice, for over three years each

here
I'll have to give them a look. I usually grab every Timberland and compare it to the others. I find them so heavy I just move on. Maybe the weight is what makes them better? Maybe you don't notice the weight while walking?
 

SoopaHick

Certified Weld Judger
Moderator
I wish I could get my company to give me $200 for a two year period. I'd like to try a higher end boot to see if it holds up longer. I haven't considered a pull on boot vs lace up. I have lots of laces ruined from welding. That brings me to another point. An all leather tongue vs a fabric tongue is much better. I have scars on the tops of my feet from melt through.

Do the pull on boots still hold your foot tight, or do you feel your foot sliding/moving around? I like a pretty tight boot.
I've never had a problem with it. You just have to find the right size. In pull on boots which I have 3 different pairs, I wear a different size in each. I also purposefully buy them just a hair too small and then get them soaked and wear them around for a couple hours sipping wet. It's horribly uncomfortable doing the break in that way but once they dry it'll fit you feet like a latex glove.
 

Greg

Make RME Rockcrawling Again!
Admin
Redwing or nothing, here. They are more comfortable than other options, last longer, insulated boots are better than others in Winter, etc. It's not worth buying cheaper boots.

I've been buying steel toe boots for 18 years, one pair per year.
 

Kiel

Formerly WJ ZUK

My work gives us 175 a year plus we get discount through redwing. I wear mine probably 12-14 hours a day. 5 days a week. They still look pretty good. retail is 250 I think though. Redwing is having a lot of shortages now though, so I'm having a hard time getting my set this year
 

RockChucker

Well-Known Member
Location
Highland
Close to 10 years ago I bought some redwings with a metatarsal guard. Wore them everyday for years working in a warehouse and machine shop. The met guard was more to protect the laces than anything. They are still very comfortable, though I don't wear them much now. My work started requiring safety toes when doing machine maintenance and I got a pair of USA made thorogoods. They broke in much faster than my redwings did and are more comfortable. They have a wedge sole and a shank inside the sole. Turns out that is great for standing on a ladder. Never had that before. I've only had the Thorogoods about 3 months and don't wear them everyday. I don't have personal experience with these, but my buddy swears by them.
 

Gravy

Ant Anstead of Dirtbikes
Supporting Member
I never thought I'd wear a square toe cowboy boot. My brother in law who works in the oil industry told me I had to buy a pair.
So I picked up a pair of Justin waterproof composite toe work boots last time I was visiting in Justin, Texas. American made.
Turns out they're amazing. Oil / slip resistant and so useful for shopwear if you tuck them under pant legs for welding. And so waterproof I was walking in a stream with them the other day and didn't get even a drop wet.

20211008_103843.jpg
 

UNSTUCK

But stuck more often.
Redwing or nothing, here. They are more comfortable than other options, last longer, insulated boots are better than others in Winter, etc. It's not worth buying cheaper boots.

I've been buying steel toe boots for 18 years, one pair per year.
Which ones? My one pair were terrible and definitely not worth the price I paid.
 

JeeperG

Well-Known Member
Location
Riverdale
Do the pull on boots still hold your foot tight, or do you feel your foot sliding/moving around? I like a pretty tight boot.
I only wear slip ons because I deal with massive amounts of metal shavings, I usually buy some that are a little tight at first but they usually break in. I average around probably 12-15 miles a day easy, still have yet to find the perfect boot for me, first pair I tried Georgia Loggers, nice boot but the heal was too tall and wrecked my Achilles, I've had problems ever since. I've burned through at least two pair of Carhartt slip ons that where so far the lightest most comfortable boots but I eat through the soles in less than a year, once the heals get all jacked up it then messes my feet up, I drag my heals the left side more so while cutting with a circular saw, across concrete and aluminum shavings.

PXL_20211008_200156372.jpg

I too am still on a quest to find the right boot, right now I'm a couple months in on a different pair of Georgia, more of the cowboy boot, round toe type, a bit heavier than I like but I'm hoping the soles hold up more than a year or a potential job change.
 

Greg

Make RME Rockcrawling Again!
Admin
Speaking of boots....

I have a pair of Ariat work boots size 11.5 that I've been trying to break in, but they are just too small for my feet and aren't budging. I haven't really worn them outside and they are in new condition but worn enough that I can't return them.

if anybody is interested, I paid $210, would be happy with $125.


20211008_170834.jpg
20211008_170858.jpg
 

Tonkaman

Well-Known Member
Location
West Jordan
I wrote a big long winded response this morning, but apparently it didn’t post. So I’ll redo it with cliff notes.

For reference I work commercial construction doing fire sprinklers. I average 600-700 hours of overtime every year.



White’s boots are the best boots money can buy! They are built with extra heavy duty materials and are FULLY rebuildable. Most cobblers will not replace the lowers of a boot but Whites will literally replace every single piece of you want. They do feel like ski boots for a few months but after they finally do break in it’s years of magic.

Danner is easily the 2nd best boot maker. Be sure to get the USA made versions. Danner made a smart move to offer foreign and domestic made boots to cater to 2 price points. The USA made ones are noticeably better. As mentioned earlier the quarry are probably the most comfortable boot I’ve ever had. I prefer the super rain forest with its extra thick leather and heavy stitching.
 

Corban_White

Well-Known Member
Location
Payson, AZ
I really like Keen work boots. I work outside a lot so only composite toe for me. Steel or Alloy get WAY too cold in the winter. I also only get waterproof. The last several years I've been running Davenports. The sole wears a bunch at first but once most of the siping wears off they hold up pretty good. All the Keens are quite a bit above $100 though. :(
 
Top