Search results

I’ve worked at Carquest in Roosevelt for 4-1/2 years. This new yoke has been here the entire time. We need it gone, and I figured maybe someone here may have a use? Neapco N2-4-4191 $15 is what we have it on clearance at. I can arrange to get it out to Heber or Kamas Carquest. You could pay over...

Last fall I picked up a 2000 Suzuki DR200SE. It still has the original tires on it. Just curious if anyone has a go to for good deals on enduro tires. Also, what other sizes would work on my bike? My google searching makes it seem the stock sizes are hard to find. At least in a matched set...

I sold the truck last week and never got around to installing the body lift I bought for it. New, opened the box to look at it, no missing parts. Located in Roosevelt, but can arrange to get it out to Heber. I've got it posted on FB for $100. I'd got $75 for someone on RME.

While attempting to install new u-joints on my driveshaft, the yoke for the front broke. So I need a yoke or a complete driveshaft. From what I can tell on car-part.com any square body S-10 truck/Blazer/Jimmy with an automatic will work. I'm located in Roosevelt so I'm not near any junk yards...

Just curious if anyone out there would have a rough estimate to convert a porch to living space. Looking to be about 60 sqft is all. 10x6. I’m curious if it would be worth doing. We could definitely use the extra space in our living room. Looking at the attached photo I’d want to wall in ten out...

We changed up our hardware at Roosevelt Carquest. Boss is selling the old bolt bins and lots of grade 5 made 8.8 hardware. 7 bins total. One is empty, the rest have some hardware. Metric sections mostly full. Posted on Facebook marketplace. Located in Roosevelt. May be able to get to Heber...

An uncle of mine used to have a white 99 firebird. He purchased it new. Had the WS6 pckage, t-tops, 6sp manual…I even got to put mile #400 on it before my mission 😁… anyway, he passed away last week and the funeral is Saturday. My brother thought it would be cool if he could find one to rent for...

Anyone have one in an AR? What are it's true real world uses? What hunting uses? Seems it's one caliber I've been seeing all the time on the shelf and even gets restocked after someone buys some. Just wondering if it'd be worth having.

I decided I should sell this bike before I get myself into trouble. Listed on KSL at $4875. I’d start at $4200 for anyone on rme. 2000 BMW R1200C https://classifieds.ksl.com/listing/64747109

So about a month ago, I purchased a 2000 BMW R1200C with just under 6900 miles on it that had been sitting for 4-5 years, maybe longer. I've been spending the last month cleaning up the tank and replacing the fuel pump. All the insulation on the wiring inside the tank had corroded away, and I...

My boss has some used equipment he wants to unload. He had sold the business it was used in and then had to repo it back from the guy. Just curious if someone here may know approximate values. It's something out of my realm so I don't know where to go to find current values on this stuff...

Valentines weekend I found a truck that looked good enough to be added to my fleet. I've always wanted a square body S10. I've always liked the way they look and so I have always kept an eye out for a deal on one. Had to be an extended cab, 4x4, and 4.3L, Those were my requirements. Low and...

Helping my brother sell his Titan. He's had it about 6 months and decided it just isn't for him. Just over 82k miles. He's changed the valve covers, and the driver rear wheel seal/bearings and e-brake shoes. Located in Roosevelt. Make me an offer. Texting is best @ Four3Five 8two8 5niner88...

Anyone else ever shoot a digitrigger? My brother just got a gun with one. He had a steel case get jammed in his upper. So I slapped my upper on and had to take a turn. The only downside is you could burn through the Ammo pretty fast 😂 https://photos.app.goo.gl/4fTquHvJLEKHconb9

I purchased a KJ over the strut spacer lift that I wasn't able to use due to my lift springs lifting more than I expected. The rear spacers were installed while I worked on the front end. The spacers were installed on top of the struts in anticipation of being able to put the lift on. Asking...

So I've been mostly a lurker the last few years. I joined RME in 2003 when I was working for Rocky-Road Outfitters in Heber. I've poked around and always enjoyed reading about others adventures and everything else, but I've never had a vehicle that I felt needed a lift for my uses. I mainly poke...

So earlier today I dropped my KJ struts off at a local tire shop. Had them break down my old struts and install new springs and struts with the old Strut mounts. I just started putting on my lift spacers and got looking at the springs. I’ve never done a lift so I don’t know, but I thought the...

So I finally bit the bullet to start ordering parts to lift my KJ. I need to replace my lower outer control arm bushings and springs. So I figured that since I had to tear it all apart to do those things, I may as well lift it. I purchased some H&R progressive rate lift springs, which were...

It's time for the annual spring consignment auction in Roosevelt. Great deals on vehicles, tractors, implements, and many other miscellaneous things. Some of which are pictured in the link. Vehicles and equipment that can be driven usually go through around noon. But that's usually not set in...

Since October I’ve been working at the local Carquest in Roosevelt. Friday we got a call about a guy needing a ring and pinion. They were pretty vague as to what axle they had and weren’t totally sure on the ratio. At first they thought it was a 9” with a 3.50:1 ratio. I showed up this morning...