Search results

$1200 for the pair. I have a dana 60 front from a 2008 ford f350 single rear wheel. And a 14 bolt rear. Both are complete with 3.73 gears. Both are in great shape. The front is massive with 4" axle tubes, 11" inner Cs and you can run 1550 ujoints, with 35 spline inner and 40 spline outters that...

I have 5 39.5x13.5R17 iroks. 4 are around 1/2 tread and 1 is almost new. Wanting $300 for all.

Where can I get some 39" bfg Baja stickies? Need to be 1/4 or higher tread. Does anyone have some used for cheap?

Hitting 21rd Saturday if anyone wants to join.

We will be hitting billings this sunday if anyone wants to join. Will probably be there for 11-12, so far we have a yota on 37s and an xj on 40s

Gonna be running 21 rd labor day if anyone wants to join. Gonna be all types of rigs from xj on 32s to a crawler on 40s. All are welcome

Well had to build a cage, and it was either keep the top and try to weld everything in there or chop the top and make it easier. Also last time I went to billings I broke my entire front axle. So I put an SD 60 up front

I have 3 315/70R17 Dick Cepek Crusher Tires. Atleast 80% tread. Fourth one had sidewall ripped on interstate. The 3 I have all hold air, no leaks, no patches. Asking $300 Obo. Located in Grand Junction Co

Starting to get better at this whole gear pattern setup thing. On my 4th gear swap. 3.73s to thick cut 5.38s.

Got the 5.38 rev thick cuts in the SD HP D60 front. Pinion preload set at 7 inch lbs, backlash set @ .007, finial preload with carrier @ 17 inch lbs. How's the gear pattern look? First pic is drive, second is coast.

Didn't wanna pay $350+ for an Artec truss. (even though it is a great product) so I made my own using some scrap I found at the steel yard. Was $30 for everything out the door. Started with a piece of 6x4x1/4 tubing, 1-1/4 x .250 dom, 3/4" fine thread tap, 3/4" hiems (from a project in 2012)...

I went from a D60 to a 14 bolt in the back of my jeep. Hows my pinion angle look. I set it at 11.5 degrees off of the flat part on the 14 bolt. Which is what the driveshaft angle was with the D60. Didnt calculate for the 2" shorter snout. How bad does my driveline angles look. Its just a trailer...

I have a Full Width Chevy Dana 44 front end. Comes with leaf spring perches, 5.38s already installed, Warn Hubs, and lincoln locked. Don't know much about the axle. I bought it in a set to put in a jeep and ended up just using the rear and staying driver drop. Axle is complete minus Calipers...

I have an NP 435 and np 205 transfer case with adapter, some brackets, and all yokes out of a 78 Ford F250. Should bolt up to some Xjs, MJs, and CJs. Everything works, good condition Asking $400 for the whole shebang. Located in Western colorado.

I have a 2009 ADDCO 10ft long x 5ft 5" (65"s)wide metal diamond plate flat deck trailer w drive-overable fenders. It weighs about 6-700 lbs and can easily be moved by hand. Will fit a full sized 4 seated side by side or 2 4 wheelers. Would be perfect for pulling ur atv or side by side with a...

I have a smittybilt tube bumper with hitch for a tj or yj. Was $225 new, asking $100. Located in Grand Junction, Co. Call or text Chad. 970-270-6432 Thanks.

I have a set of inner/outter shafts from an HP D60 King Pin axle. Asking $150 Located in Grand Junction CO. Call or text Chad. 970-270-6432. Thanks

Ill be down there wednesday thru sunday. I was looking to do some moderate trails like first half of fins, poison spider,metal masher, etc on thursday and friday. Ill be at the races on sat morning then maybe wheeling sat afternoon. Let me know if anyone wants to meet up. Ill be in a cherokee on...

I have a set of 5-30x9.5R15 BFG ATs on 5 stock jeep wheels. All with 3/4 or better tread. Asking $500 obo. Spare is new but not in pictures. Call or text Chad. 970-2six1-84five7. Thanks.

SOLD. To a gentlemen in a lab coat.