Search results

Sorry posted that by mistake and then didn't get this posted after I wrote it apparently What are some good kits people have used? Are there any special tool I will need?

Thread revival... Not for opinions but for some specific advice/tech. I have an 89 k case 700r4 and it needs rebuilt. My uncle is a former ase Master mechanic turned electronics engineer after he hurt his back really bad. He said he will help.me but he quit turning wrenches back in 86 so isn't...

Minus the extensions for the shackles that like perfect and what I was trying to think of. Were you able to add shackle points later to it? I notice your fenders are taped with paper. Is the area covered in paper what you were able to keep and the metal closer to the tires you trimmed?

Can those of you that have picture post them? If you have measurements that would be exactly what I am looking for. I have a picture of what I am kinda thinking but can't get it to post

Pretty much how unstuck described it. I have the hangers hanging (well I will have them) from the out side of the bumpers both front and rear as well as moved then outward sideways for the full width axles. I just want to do the bumpers once and be done and since I know my end goal I really...

We would snag this up if it weren't such a long trip now. Good luck with the sale, we have been looking for something like this cause we have a bunch if smaller parts we need a donor for.

I included it is a yj tub because I need the pivot offset enough that I can open the rear door far enough to be able to open the full-size took drawer I'm putting in the back.

Forgive me if I'm retarded because, well, I am thanks to my phone making the forum hard to navigate. I was trying to search but wasn't having the success. So my situation is this, need bumper design idea because my original designs won't work cause my build changed. I'm a CJ7(kinda), yj tub and...

I have been watching this because we have been debating about buying one ourselves since we have 4 rugs waiting for tubing.

Been browsing around and didn't find anything so I thought I would start one. What are peoples preferred methods for cutting stuff? I have a plasma but it only cuts 1/4" cleanly. It is quick and pretty clean(when all goes well). It has its drawbacks; initial cost of machine, 220 if you don't...

I was part of another group who had a rescue part of the admin. To be part of the rescue admin you had to be able to do solo recovery of a normal vehicle aka winch, compliment of tools and safety knowledge. Any message sent to this admin group went out to everyone in that group and they...

I will be coming down in the next few weeks to pick up my jeep and will have an empty 16' trailer heading down and some room heading back up. I can go through pocotello or make a pick up/drop off anywhere if you need. My number is 208-608-0379. I will also have some enclosed space inside my...

Stock H1 rim and 36-38" tire (prefer 38) Looking to borrow a rim and tire for mock up this weekend. I can pick up tomorrow and return it is Sunday. Prefer in the area between dugway and Ogden since I am going that way anyway. Text me at 208-608-0379 if you can help. Wo t be ran or...

Looking to borrow a rim and tire for mock up this weekend. I can pick up tomorrow and return it is Sunday. Prefer in the area between dugway and Ogden since I am going that way anyway. Text me at 208-608-0379 if you can help. Wo t be ran or anything, just used for getti g the spacing g right on...

That was my thinking but that is why I asked.

Bump on the front axle. Make me an offer because I am moving and need this gone.

What is the thinnest metal you would use to deck a trailer? Does expanded metal stand up well?

Yeah I'm doing the math on that too and it is heavy, no doubt on that. I also thought about doing steel on the tail(where most of the damage I do happens) and wood deck on the front. Doing that though I have to make sure I keep it tongue heavy so it isn't swinging empty. That or wood over the...

Ok so I was given 6 20' sticks of 6" channel. How heavy of a trailer can I build with this? I have a set of 6,000lb ea brakes axles I can get my hands on as well. I also have 3 sheets of 8'x8' 13x64 plate I was thinking of using for decking since I tear my wood deck up all the time on my 16'...

Where are you at? I have a ho art handler 120(yes it's old). I bought it for $50 listed as "for parts" and have resurrected it. Wasn't that bad, guy was trying to use .035 wire with a .025 roller in it, he had grease all over inside it(like he tried to grease the roller assembly grease), gun...