Search results

  1. Caleb

    Building a gun safe

    I already do that between my home and my cabin. I forget I leave guns in the safe up there and then I can't find them and go looking through my safe here at my house pulling my hair out. I like this idea of building your own safe. I bet it could be done far cheaper than buying something and...
  2. Caleb

    Lifetime Products

    My lifetime shed ended up in a pile on the concrete slab after a huge wind storm. It was weird, pieces didn't fly everywhere like I would have expected, it just fell in a pile. It got replaced with a Tuff Shed.
  3. Caleb

    Reloading...

    Hmmm, you know, I've never asked I've always assumed you're not allowed to collect your brass. I'll have to ask next time I'm there in a couple days.
  4. Caleb

    Reloading...

    I've had a Dillon 650 for several years (I think I bought it in 2009-ish). I've had the 9mm dies and parts for almost as long and I'm just now getting around to actually using them :( I've also got a single stage rcbs rock chucker that I haven't had setup in forever. This is my current...
  5. Caleb

    Wanted Wheel spacers

    JL vs JK I think is just a 14mm vs. 1/2" stud or something like that. Most wheels will work between the two but the spacers may be a tighter tolerance and may not work.
  6. Caleb

    There goes the neighborhood...

    I'm with Shawn, a SxS owner and I love getting out in our SxS with my family. Probably more so than I've ever enjoyed getting out in a 4x4. However, the only thing this is going to do is generate more revenue, but the cost at doing that is going to be both more actual $$$ but also the noise...
  7. Caleb

    For Sale Wanted!!! NP231

    Man, that sucks. Hurts even more someone was just giving one away (it's gone now though) on here.
  8. Caleb

    Snowbikes!

    Sorry, Kurt wins the thread.
  9. Caleb

    Fall Colors, they're happening!

    I bet it's going to be awesome up there. Given that's a little higher (or a lot :D) than my cabin, I bet it's a little further along.
  10. Caleb

    Reloading...

    Thanks! My first 250 rounds were Berry bullets, I liked them but given I'm just shooting at the range, was curious if there was a more economical option. I ordered 500 bullets from sns castings and will give them a shot, they were around $0.03-$0.04 per bullet cheaper than Berrys. When I've...
  11. Caleb

    Kino the Tundra - Steve's 2018 Toyota Tundra

    I love easy mods like that, that solve an issue. You can do a very similar "trim" job on the 5th gen 4Runners.
  12. Caleb

    Reloading...

    I've been reloading .223 for years, and have had everything to do 9mm for years. Since I've been shooting a ton of 9mm lately, I've decided to finally get my reloader setup for the 9mm loads. I've gone through my first 250 rounds and they worked great. Now my question for those that reload...
  13. Caleb

    Fall Colors, they're happening!

    If you're one of those that like to get out during the changing of the colors, it's in full swing. Probably have a couple weeks before it's gone but if you want to get out and enjoy them, I'd suggest you do it soon. These are a few pics from up at my cabin this weekend: Share your...
  14. Caleb

    Activity Gambler 500 September 21-22

    Not quite. If you read it again, it says two or more contestants compete that meet either or both of those requirements. Meeting up for a trail run, a camping trip, etc doesn't make you a contestant and I'm quite certain you're not competing for anything on a friendly trail run. I'm sure...
  15. Caleb

    Activity Gambler 500 September 21-22

    Is there some definition of impromptu that I'm missing or is that what they tell themselves to make them feel better about not getting the permits? How could something that is scheduled with a date with a set or rules/guidelines be considered impromptu by any definition?
  16. Caleb

    GMC / Chevy Thoughts on Chevy Colorado ZR2's

    I believe @jeeper has had a colorado for quite some time.
  17. Caleb

    Ideal alignment values (camber, caster)?

    Took it in to Sandy Big O today and they were awesome! They got the camber exactly where it needs to be, pushed the caster up (it was at +.8* when I took it in) and didn't question the UCAs at all, knew exactly what to do. Even though they are across the valley from me, I'll be returning for sure.
  18. Caleb

    Shop / Tools Sandblast cabinets

    I reached out to them about their other machines and the next step up (in terms of pricing) is the Weekend Warrior and that bumps up to just shy of $2.9k starting point :(. I was hoping they’d have a machine in the <$1500 range that was just a bit wider than the micro. I think I’ll be doing the...
  19. Caleb

    Shop / Tools Sandblast cabinets

    Looks like i can get in to a vapor honing machine for less than $900 shipped...hmmm, that's super tempting. Off to do some more research :D http://vaporhoningtechnologies.com/micro-vapor-hone/
  20. Caleb

    Shop / Tools Sandblast cabinets

    Tell me about it? I've done some searching and it looks very interesting. What's the entry level cost associated with a wet blasting or vapor honing setup? Right now, I'm about ready to spend $1100 (yeah, I bumped my budget a little :rofl: ) on a skat blaster with a vacuum setup, rollers...
Top