1989 Ford BroncoII project

phillippi

Never enough time
Location
Utah County
SOLD! I have a 1989 Bronco II that I started a straight axle and V8 swap. This was years ago and I ran out of time and money. It has been sitting in my garage for the last 7 years gathering dust. The front fenders and front clip are removed. The interior is in good shape for a 89. The stock fuel tank was replaced with a Poly 23 gal in the stock location.

Currently I have 1985 V8 5.0L out of a fullsized Bronco. It has the AOD attached and transfer case. Its just sitting in the truck, not installed officially.

I also have a cut down D44 (formerly fullsized D44.) w/ 3:50 gears. The long side axle shaft was cut and resplined to EB specs.

The front D44 is in place with James Duff EB front springs with extended arms. The steering is not setup and I havent located a track bar either.
Rear diff is currently the stock Ford 7.5" with Detroit Locker and 4:56 gears.

Parts included :
Early Bronco small bearing Ford 9" minus third member. I have an open rear diff and a track lock diff and 3:50 gears
Mustang upper intake for 5.0L.
Remote oil filer mount kit from James Duff
EB 3" lift shocks - James Duff
straight steering arm (ends threaded)
most likely more parts. Will list them as they are located.

I would prefer to keep all together. Just a guess at a price of $650 OBO (worth more to me for sentimental reasons of course). Bronco currently in my garage in American Fork. If interested, email me (best way to get a hold of me) to set up a time.

***Will add pics as soon as I can get to it***
 
Last edited:

Tarryn-itup

Member
Location
Price
I'm interested in this. Would really like to see some pictures of engine and axles and body condition.


Sent from my iPad using Tapatalk
 

phillippi

Never enough time
Location
Utah County
I am so sorry, I have not checked this. I will get some pics Saturday after work.

The dana44 is driver drop and EB sized. The rear 9" is small bearing EB.
 

phillippi

Never enough time
Location
Utah County
Here are a bunch of pics I just took. This bronco has been sitting for so long its very dusty. The front seats have covers on then and are in good shape. The only problem is on the drivers side on the left leg area, there is a hole in the cloth. If more pics are needed (expecially of the back seat area) just let me know. This has been used as storage and will have to be unloaded LOL.20161029_180317.jpg20161029_180829.jpg20161029_180724.jpg20161029_180700.jpg20161029_180604.jpg20161029_180531.jpg20161029_180504.jpg20161029_180408.jpg20161029_180339.jpg20161029_180842.jpg
 
Last edited:

phillippi

Never enough time
Location
Utah County
Here are some of the dash and front area.
 

Attachments

  • 20161029_181029.jpg
    20161029_181029.jpg
    120.8 KB · Views: 47
  • 20161029_181014.jpg
    20161029_181014.jpg
    159.3 KB · Views: 52
  • 20161029_180934.jpg
    20161029_180934.jpg
    81.4 KB · Views: 47
  • 20161029_180911.jpg
    20161029_180911.jpg
    94.5 KB · Views: 51
  • 20161029_180921.jpg
    20161029_180921.jpg
    106 KB · Views: 53
Top