Toyota R151 Transmission $900

Damin

Formerly jakeypoobear
Location
So. Jordan
This is a pretty rare toyota 4cyl 4x4 transmission, bought it a couple years ago, i disassembled it completely and replaced every spring, synchro, bearing, washer, seal, and steam cleaned the case. It's a bran new transmission. It has the lowest 1st gear out of any Toyota truck or SUV ( 4.31:1 - 4 to 1) great for towing or off road. Will fit behind 3.0 and 3.4 liter V6, so tacoma, 4runner, truck pre 95, T100, will also fit behind 22r motors with a different bell housing.

Side nots:
1: Built then put on a Dino Machine, installed but never started the tacoma.
2: For an extra $200.. stage 3 clutch, flywheel and throw out bearing bran-new not one turn on it. (6 puck clutch disk)
3: Came From 1985-87 turbo 4cyl, 4x4 ( R151F ) truck or 4 runner.
4: All gear driven and a gear driven case will bolt right up no need for an adapter unless you an atlas transfer case.

This is my rock bottom price, don't ask for price reduction.
 

Attachments

  • 2010-06-03 21.26.32.jpg
    2010-06-03 21.26.32.jpg
    45.2 KB · Views: 23
  • 2010-06-03 21.23.44.jpg
    2010-06-03 21.23.44.jpg
    43.4 KB · Views: 26
  • IMG_20110209_105424.jpg
    IMG_20110209_105424.jpg
    50.5 KB · Views: 22
  • IMG_20110209_105310.jpg
    IMG_20110209_105310.jpg
    47.9 KB · Views: 22
  • IMG_20110204_133727.jpg
    IMG_20110204_133727.jpg
    49.6 KB · Views: 21
Still available?

This is a pretty rare toyota 4cyl 4x4 transmission, bought it a couple years ago, i disassembled it completely and replaced every spring, synchro, bearing, washer, seal, and steam cleaned the case. It's a bran new transmission. It has the lowest 1st gear out of any Toyota truck or SUV ( 4.31:1 - 4 to 1) great for towing or off road. Will fit behind 3.0 and 3.4 liter V6, so tacoma, 4runner, truck pre 95, T100, will also fit behind 22r motors with a different bell housing.

Side nots:
1: Built then put on a Dino Machine, installed but never started the tacoma.
2: For an extra $200.. stage 3 clutch, flywheel and throw out bearing bran-new not one turn on it. (6 puck clutch disk)
3: Came From 1985-87 turbo 4cyl, 4x4 ( R151F ) truck or 4 runner.
4: All gear driven and a gear driven case will bolt right up no need for an adapter unless you an atlas transfer case.

This is my rock bottom price, don't ask for price reduction.

Ik this post has been dead for a few months but is it possibly available?
 

Damin

Formerly jakeypoobear
Location
So. Jordan
these are expensive transmission there $1700+freight from Marlin if you don't have a core.. and thats true no adapter need here. plus its has a granny low 1st gear
 
Last edited:

RockChucker

Well-Known Member
Location
Highland
For all the jeep guys with ax15's, you can put first gear and the cluster shaft out of this trans into an ax15 to get a granny gear first. This isn't much different than buying the parts to do it either.
 

zukijames

Well-Known Member
Location
not moab anymore
Wanta trade for 2 r150fs and an adapter to gear driven cases lol. That low first would really be nice when I'm racing and get to the rock sections I could keep it in high with out beating the shit out of things lol
 
Top