Wanted 1988 S-10 Front Driveshaft

stimmie

Registered User
Location
Roosevelt
While attempting to install new u-joints on my driveshaft, the yoke for the front broke. So I need a yoke or a complete driveshaft. From what I can tell on car-part.com any square body S-10 truck/Blazer/Jimmy with an automatic will work. I'm located in Roosevelt so I'm not near any junk yards that have what I need. Let me know what you've got.

Thanks
 

I Lean

Mbryson's hairdresser
Vendor
Location
Utah
I have one in my 1996 that will need to come out, if that happens to work. You said square body though, so I'm assuming this one is different....
 

stimmie

Registered User
Location
Roosevelt
I have one in my 1996 that will need to come out, if that happens to work. You said square body though, so I'm assuming this one is different....
Only up to 94 works from what I see. Nephew got t-boned in a 95 Wednesday. I’d steal that one if it would work but it won’t. Nephew is fine, truck is not. Two days after licensing and insurance on the truck too…. 🤬
 
Top