4 Seat Buggy

CSR

Active Member
Location
Mapleton
Yup, I'm selling it because I'm ready to start the next build. Seats 2 adults and 2 kids. Asking $25,000 and pretty firm on it for now. Here are the specs:

-5.3L with LS1 intake
-TH350
-Atlas 4.3:1
-14 bolt rear with 4.56 gears, disc brakes, and Detroit, 1/2 inch thick diff cover
-Low pinion 60 front, 35 spline throughout with 4340 outers and drive flanges, spicer u-joints, Detroit, 4.56 gears, 1/2 inch thick diff cover, and high steer arms
-Walker Evans beadlocks
-40 inch sticky Trepadors with decent tread
-PSC full hydro steering with single-ended ram and tie rod tucked safely behind the axle
-Finished aluminum interior
-RJS harnesses in front, sweet purple Cherokee lap belts in the rear
-Full dual exhaust
-triangulated 4-link front and rear with chromoly 7/8" heims
-12 inch travel Fox 2.0 airshocks at all four corners
-10 gallon poly gas tank with steel braided feed and return lines
-Walbro fuel pump
-polycarbonate side panels and Campbell Liberty hood, custom chrome grill
-fully skidded underneath
-112" wheel base
-measures roughly 71" to the top, and the body is about 52" wide

This buggy is long, low, smooth, rattle-free, and stable as they come. I'm 5'11", mostly torso, and I have enough headroom. This thing may not be the best for super long-legged folks, but it will fit the average-sized person fine. Located in Mapleton.

Chris
801-898-1631
csridges@yahoo.com
 

Attachments

  • dragonfly left front.jpg
    dragonfly left front.jpg
    94.9 KB · Views: 100
  • rsz_img_0515[1].jpg
    rsz_img_0515[1].jpg
    100.5 KB · Views: 87
  • rsz_img_0513[1].jpg
    rsz_img_0513[1].jpg
    88.2 KB · Views: 91
  • rsz_img_0508[1].jpg
    rsz_img_0508[1].jpg
    115.9 KB · Views: 87
Last edited:
Top