4x4 labs cross over steering (toyota)

[TRD270]

Put on the truck the chevy 1ton tie-rod ends are just a little to beefy for the offset wheel we are running

was cheaper to order new Hysteer from allpro with the fj80 ends then to order new rims

$150 and the set up is yours

No pitman arm

 

[TRD270]

I have had a few people ask the backspacing on the rims we are running. what I measured is 4.5inches so I think anything with 4 inches or less would clear no problem

that being said I have no idea if I measured "backspacing" correctly so to tell you how I measured it.

from the backside of the rim, center hub to back edge is 4.5 inches so via my measurement if you have 4 inches or less from the center of your rim to the back edge you should clear.

 

[TRD270]

btt

 

[TRD270]

Sold!