AndersonOffRoad
Active Member
- Location
- Stansbury Park Utah
Up for grabs is a Almost fully restored 1970 cj5
I have almost every thing to complete this project but time. It is a 98% rust free body (there is a little in the storage compartment under the passenger side seat)
It has:
Suspension
Spring over axle conversion
All New bushings on the leafs/steering
(it will need a drop pitman arm ($50 on ebay)
It has a set of 33 12.50 R15 on it and a set of 31 10.50 R15 I will throw in
Engine/Drive train
It is the jeep V6 in it with the offenhauser intake manifold and holly carburetor
Warn overdrive
Dana 44 Rear Axle
Dana 27 Front Axle
New Drive lines (front and rear)
Rino lined frame
This Classic jeep has been very well built.
Nada guides has the low value on this jeep at $6,525 and the high at $16,470 so with a little elbow grease and a little time you could have a AWESOME JEEP
http://www.nadaguides.com/Classic-Cars/1970/Jeep-Corporation-AMC/CJ5/Jeep-Universal-4X4/Values
Asking Only $3,500 OBO
If you want pics Pm Me and I will Email them to you Also you can look on KSL
http://www.ksl.com/index.php?nid=218&ad=18008671&cat=402
Thanks for looking
Kyle 801-856-6138
I have almost every thing to complete this project but time. It is a 98% rust free body (there is a little in the storage compartment under the passenger side seat)
It has:
Suspension
Spring over axle conversion
All New bushings on the leafs/steering
(it will need a drop pitman arm ($50 on ebay)
It has a set of 33 12.50 R15 on it and a set of 31 10.50 R15 I will throw in
Engine/Drive train
It is the jeep V6 in it with the offenhauser intake manifold and holly carburetor
Warn overdrive
Dana 44 Rear Axle
Dana 27 Front Axle
New Drive lines (front and rear)
Rino lined frame
This Classic jeep has been very well built.
Nada guides has the low value on this jeep at $6,525 and the high at $16,470 so with a little elbow grease and a little time you could have a AWESOME JEEP
http://www.nadaguides.com/Classic-Cars/1970/Jeep-Corporation-AMC/CJ5/Jeep-Universal-4X4/Values
Asking Only $3,500 OBO
If you want pics Pm Me and I will Email them to you Also you can look on KSL
http://www.ksl.com/index.php?nid=218&ad=18008671&cat=402
Thanks for looking
Kyle 801-856-6138
Last edited:
