General Tech Another gear pattern check

Shawn

Just Hanging Out
Location
Holly Day
Can someone let me know your thoughts on mine?2EEC9228-A490-4FD6-B2B8-0AEE830C4F51.jpeg
 

Attachments

  • 0DCFE30F-81A5-4E21-9185-ACF29DE3E4E2.jpeg
    0DCFE30F-81A5-4E21-9185-ACF29DE3E4E2.jpeg
    299.1 KB · Views: 13

skippy

Pretend Fabricator
Location
Tooele
Definately runnable but I would add some pinion depth and try to bring that coast side up a bit. If your backlash is on the looser side you can tighten that up and that might help with the pattern.
 

Shawn

Just Hanging Out
Location
Holly Day
Thanks for the reply. My backlash is set at .008 with an acceptable range of .008-.012 so I figured I was good. I too thought the pinion was too shallow and planned to add a thicker shim and the final.
AppreciAte the feed back, been messing with this for a couple of days and started second questioning myself.
 
Top