Artec Industries Lower Link Axle Brackets

muleskinner

Well-Known Member
Location
Enoch, UT
PM me with your paypal info if these fit most standard RE or Tera monster joints, I am gathering parts for an hp44.

From Artec's web site-

2.625" mounting width with 9/16" bolt hole for common sized Cartridge Joints (Johnny, Flex, Ballistic, etc). Can be drilled out to larger hole size for 1.25" rod ends with spacers.
Made from 1/4" thick boxed steel plate for strength and impact resistance.
Grease fitting access on top to allow easy maintenance of your most abused joint.
Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint.
The STYLE of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.

http://www.artecindustries.com/Lower-Link-Axle-Brackets-pair_p_252.html
 

muleskinner

Well-Known Member
Location
Enoch, UT
Depends, does your 44 have 2 3/4" tubes or 3''?

You could grind it to fit whatever you want? I use these on my 60 and 14B, so I'd imagine they are probably made for 3'' axle tubes.
 
Top