Ford Brian's bronco 2 gets wontons and dddd

[YROC FAB.]

Austin added smore lights to the front and wired in the stereo and lighted flag mount.

I installed a radiator over flow, mounted the computer, and fabbed and installed a hood prop. Note the custom drill holder?. I aired up the little 2.0 air shocks to the maximum recommended psi of 500 pounds, suprisingly. It sits a little raked out. They usually settle a bit so we will see. The only testing it got was around the block a few times to make sure the transmission worked and now its getting loaded on the trailer. Guess thata no different than the other years. Hammers bound in the am. ?

 

[YROC FAB.]

She wheeled all week, Just need a daily race prep but over all it works damn good and crawls every where with that eco box and them bald stickies.

?


I had to test out the front dig in camp. works good.

 

[YROC FAB.]

Video of the bronco getting it up the sand mountain. F*ck word warning>

 

[YROC FAB.]

It got a upper balljoint eliminator kit installed on the front 60. One side was totally shot. He also got a set of Krawler for it which Austin installed for him. We scabbed some new rear shackle mounts on it and made some new shackles as the factory ones were completely smashed and tacoed over.

Hes got most the parts to link the rear which we may do this month if i get time

 

[YROC FAB.]

 

[YROC FAB.]

Bronco is getting some love. Brian smoked the gears in the front end. He sploded a stub shaft at, a rear 14b shaft, and a leaf spring all at the same time while at koh lol. He fixed all that then broke another 14b shaft and then the gears since we've been back. We are going to link the rear out finally with some trailing arms and queen shocks.

 

[YROC FAB.]

 

[YROC FAB.]

Got the ole pipe kinker out to muscle this 2" .250 wall dom.

 

[YROC FAB.]

 

[YROC FAB.]

 

[I Lean]

I pretty much love everything you build.

 

[Coco]

Going full race truck?

 

[YROC FAB.]

Going full race truck?

Full send.

 

[YROC FAB.]

I pretty much love everything you build.

I'm glad our nonsense can bring you joy.


Midday Saturday naps for Brian and his puppythe uppers are 1.5" .120 wall seamed tube slugged with 1.75" .095 4130

 

[YROC FAB.]

 

[YROC FAB.]

 

[YROC FAB.]

All the travels 👌

 

[YROC FAB.]

 

[I Lean]

It's getting less and less BII all the time.

 

[YROC FAB.]

It's getting less and less BII all the time.

Impressively it still has the same windshield from when we started. Its been through 4or5 driver doors now.