- Location
- Richfield, UT.
- Asking Price
- $11999.00
Toyota based buggy built in 2012.
48" wide chassis, built with 1.5" DOM tubing, Im 6' 3" and have plenty of head room.
It has a Toyota 20r 4 cylinder that has been gone through in 2010 that runs off propane, manual toyota 5 speed transmission, Dual Toyota transfer cases with 4.7 gears in the rear case with a trail gear twin stick.
It has ifs width rear housing with a v6 third member stuffed with 5.29 gears, full spool, trail gear chromoly shafts, disk brakes, and axle truss.
Front axles is a 1985 housing with a bottom truss, full top truss with knuckle ball gussets, It has a TRD elocker loaded with 5.29 gears and Trail gear Dirty thirty shafts with receipts for warranties, Solid trail gear drive flanges.
Full hydraulic trail gear double ended ram steering. The knuckles have been reinforced at the steering stops and the high steer arms have been machined along with the knuckles to have key stock in between.
New wilwood master cylinder, 5 point harnesses, muffler, fan and fan shroud, New top half of chassis all tig welded, quarter turn fasteners on panels .
Suspension is 4 linked front and rear with 7/8 ruffstuff heims all around. 16" fox 2.0 air shocks all around.
Brand new 38x12.5x16.5 tsl super swampers on trailworthy recentered h1 dual beadlocks.
Call or text cory at 435-558-zero8one6 Located in Richfield utah
48" wide chassis, built with 1.5" DOM tubing, Im 6' 3" and have plenty of head room.
It has a Toyota 20r 4 cylinder that has been gone through in 2010 that runs off propane, manual toyota 5 speed transmission, Dual Toyota transfer cases with 4.7 gears in the rear case with a trail gear twin stick.
It has ifs width rear housing with a v6 third member stuffed with 5.29 gears, full spool, trail gear chromoly shafts, disk brakes, and axle truss.
Front axles is a 1985 housing with a bottom truss, full top truss with knuckle ball gussets, It has a TRD elocker loaded with 5.29 gears and Trail gear Dirty thirty shafts with receipts for warranties, Solid trail gear drive flanges.
Full hydraulic trail gear double ended ram steering. The knuckles have been reinforced at the steering stops and the high steer arms have been machined along with the knuckles to have key stock in between.
New wilwood master cylinder, 5 point harnesses, muffler, fan and fan shroud, New top half of chassis all tig welded, quarter turn fasteners on panels .
Suspension is 4 linked front and rear with 7/8 ruffstuff heims all around. 16" fox 2.0 air shocks all around.
Brand new 38x12.5x16.5 tsl super swampers on trailworthy recentered h1 dual beadlocks.
Call or text cory at 435-558-zero8one6 Located in Richfield utah