Cory's "Race" trailer upgrades.

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
So last January before KOH i bought a 24' 8' wide box trailer off a friend for two reasons; I have two buggies, and im tired of tenting/camper shelling it. After several trips to my friends house with the tape measure it was concluded both my buggies would fit in there perfectly.

Before our trip i made this little aluminum oil 14quart bottle holder because "Race", installed a mirror on the door, and a latch on the inside of the door,
51014071_295098154522863_7316629010966904832_n.jpg

Fugly crude shelf from PO.
51635297_2078185548936391_383078131814105088_o.jpg

I also fabbed an aluminum spray can holder with a shelf and chain holding rod.
51263722_2078185578936388_2287098874285785088_o.jpg51052053_2078185662269713_964516227227582464_o.jpg

It has close to a 4' dove tail making the opening quite a bit bigger than it looks. The opening is right a 6'2
51182382_2078185615603051_7296441904466493440_o.jpg

Koh camp 19'. It was so much better to stay in then the tents or camper shell.
52480897_2090811827673763_7403590016967901184_n.jpg
 

Attachments

  • 52480897_2090811827673763_7403590016967901184_n.jpg
    52480897_2090811827673763_7403590016967901184_n.jpg
    110.3 KB · Views: 0
Last edited:

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
Over the summer i made some fold down little cot beds. Home depot had the pads and covers and i just built some 1" tube frames for them with hinges that screw to the wall. I used expanded metal underneath to keep it light and get a natural sag thats desired in a cot style bed.

QC bed inspector hard at it.
64864168_2294863247268619_7894306205382737920_o.jpg


67634437_2343021449119465_4065957483703697408_o.jpg

We took it up to fish lake with the new beds and to my surprise the 4 runner on 35's fits in the trailer.
67356129_2343021402452803_8461655996316516352_o.jpg

After koh i outfitted this tool box as the "Race" trailer tool box. But the only way to fit the box and both buggies was to remove the tool box, pull in first buggy, then put it between the f/r tire of the second buggy and walk the box up the ramp as you drive the buggy in. After doing that half a dozen times i was over it and decided there must be a better way to do it.
70341700_489884758469141_6314881370107674624_n.jpg

F that box
69761988_2410287982592577_3351325275550908416_n.jpg

1" .120 wall square tube
70596765_387050468652079_2520456542105370624_n.jpg

left over bed expanded metal.
69631569_539521560126550_7870017284855562240_n.jpg

About killed myself getting that thing into place, Its 8' wide after all and there is no one to help when its 3am lol. 42" tire clearance. The top is about 3" under my nipple which is great for my tall ass.
70477068_439490716653715_4332635387546566656_n.jpg

Made one of those receiver vise mounts. i put a hole in the end of the vise mount so you could pin it into the back of a truck receiver hitch if you need to get western.
70841945_392645021442003_1292238896385490944_n.jpg70880506_715758818895836_2114598831466217472_n.jpg
 
Last edited:

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
I ripped out the fugly PO's shelf. I had some 1/8" aluminum laying around so i cut and fit in a few sections.

70251918_2339119319639142_5453225482155720704_n.jpg

For drawer locks i just drilled a 1/4" hole and dropped in some 5" long bolts.
70237536_2590101537722775_8809686847102910464_n.jpg

Just wide enough that some poor soul could sleep on it.
70396462_657349841425464_5186923448080793600_n.jpg

To free up some room inside i moved the spare tires outside to the back fold down door.
70024837_516957732395646_7475055571238912000_n (1).jpg70150122_513971129362049_9088360040552726528_n.jpg

#murderwheelz Yes they clear the ground when the door is down.
70404952_506746356783516_6244539061453717504_n.jpg

Crappy picture aside, i drilled a 1/4 hole through one stud on each wheel to "secure" it with a paddle lock.
70407301_485520585566503_600332554196746240_n.jpg

A generous friend donated a 6' tool box off one of his old work trucks and it made for a nice tote replacing cabinet.
69809582_400411027285264_2800085378663448576_n.jpg

I cleaned and installed it today and glued down some padding and started nesting my crap into it.
70390546_517352345665703_482071986911051776_n.jpg
 
Last edited:

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
Committed now lol. I got a couple windows off ebay. Cutting the one hole in there for now seamed like it made the inside twice as big. I have two 30x20" windows. one on each side and then later i would like to add one on the man door. I had to cut through one vertical brace for the windows. I do not plan on reinforcing the area as they are on 16" centers which is pretty overkill for a trailer. 70357323_520328805175931_6755603559376486400_n.jpg

Peek a boo
70637508_659422374554939_6727915344033218560_n.jpg

69850016_899421653778039_3015403432220557312_n.jpg70040428_391210498259041_5005449092571070464_n.jpg

Cornhole?
70391941_2336595559890576_7061241541058101248_n.jpg
 

Attachments

  • 71102725_665731407270812_4004957467652915200_n.jpg
    71102725_665731407270812_4004957467652915200_n.jpg
    8 KB · Views: 1
Last edited:

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
Picked up a cheap ac unit off a FB yard sale yesterday.

69931868_470892953638934_6126986596836179968_n.jpg

Cheap Amazon led 12v lights.
70265288_1084303291960597_3969731975547191296_n.jpg


70805839_2232784676832931_6683250140876111872_n.jpg71219801_1167181070138748_1626666533478465536_n.jpg

Im going to run a 12v battery to run the lights and a 800watt inverter and then i got a battery tender to maintain the battery when i have access to 110 power and or get a generator.
70801811_795765920821286_403439038461116416_n.jpg

I ran some 110 outlets in there with a male plug on tongue. I plan on planting a microwave in this corner and the battery tender will occupy one outlet here so i added two extra plugs.
70031566_389870851676362_1597198187334991872_ne.jpg

This one is at the back of the trailer.
70962485_379366519424969_806409869652393984_n.jpg
 

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
Got a super cheap marine battery and fabbed a sweet mount for it and the trickle charger:rofl:. I also wired in the inverter.

71019496_728953264219921_5908961210644037632_n.jpg

This is a main kill switch for the battery. I plan on using it as light switch even though each light has its own switch. I like having main kill switches on all my toys in case of fire, ease of maintenance, and JIC something is drawing power when not in use.
71176057_465728564013458_2529511226518536192_n.jpg

YJ_Auzzy Installed some extra tire covers on it for me while i was at work. Thanks bud.
70979209_423648018283858_963833301657714688_n.jpg
 

I Lean

Mbryson's hairdresser
Vendor
Location
Utah
You should throw a solar panel on the roof--then the battery will be charged and ready to go whenever you need it, without needing to plug it in regularly. :cool: It's one of my favorite upgrades on my camper.
 

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
You should throw a solar panel on the roof--then the battery will be charged and ready to go whenever you need it, without needing to plug it in regularly. :cool: It's one of my favorite upgrades on my camper.

It was in the back of my mind. I use to have one on my Cummings that I only use to tow a few times a year. Either way my cheap 4000w generator showed up today and I plan on wiring in my accessory wire in my 7 way so it also charged the battery when it's being towed
 

YROC FAB.

BUGGY TIME
Vendor
Location
Richfield, UT.
After being in there with the sun beating down on it I decided to insulate the ceiling. The walls are 3/8 ply wood with about 1.25inch air gap from the outside tin. The roof was just thin metal with a very thin wood panel down the middle to support the metal. When I was in there the wall felt fine the roof wood was hot and the exposed metal was so hot you couldn't touch it. Hopefully this 1 inch foam takes the edge off. I cut them all about .25 inch extra and just wedge them in.


20190920_030330.jpg20190920_030355.jpg20190920_030411.jpg
 
Top