GM D44 or 12 Bolt Parts WANTED

[My10%]

I know there has to be good "starter" set axles laying around out there....

I'm in need of good or new 4.10 or 4.56 gear sets currently have stock 3.73 ratio now.

Would like locker for rear and same for front.

I would also consider upgrading rear axle if already geared 4.10 or 4.56.

Let me know what you guys got laying around from your first build.


THANKS
801-792-7104

 

[BCGPER]

I've got a set of 12 bolt 4.56's I'd let go cheap. I installed them, then drove about five miles and realized they were just too low for my hiway cruiser.

I have just the gear set, you'd still need the 4.10 and lower carrier.

 

[utjb57]

I have a set of 456 for a d44 front and a 12 bolt rear ran them for a while and went to 538 200.00 for both
R&P only no carrier

 

[TEAM FRED]

Is the front Standard or Reverse cut. If reverse I have a set of new 4.56s.

 

[TEAM FRED]

Oops Title says GM Sorry

 

[My10%]

I should have mentioned I wouldn't mind a good used locker/posi since it's a daily driver.

 

[PencK5]

ive got a D44 with blown gears and a 14 bolt rear that i believe has 4:10 gears
was going to use but am getting my hands on a D60 and 14 bolt set up
-300 for both-
its a hi pinion passenger drop to
all chevy

 

[PencK5]

sorry both are also 3/4 ton 8 lug
got to get rid of that C-clip

 

[My10%]

Does the D44 have flat tops?

 

[Maverick]

Just buy my D44: 4.56 gears, lockrite, flattops, crossover.

 

[Thardy]

I've got a set of brand spankin' new US Standard Dana 44 4.56 gears for a 3.73 and down carrier. Bought them from Randy's 6 months ago. Opened the box long enough to look at them and haven't opened it since. Willing to sell for $140 Let me know if your interested. Could deliver anywhere along I15 between Tremonton and Nephi, Friday afternoon.