For Sale Jeep Gladiator wheels & tires; 285/75/17

Greg

Make RME Rockcrawling Again!
Admin
Asking Price
$1000
I'll be upgrading in the near future, figured I'd list these now.

These are the OE wheels & tires off my 2020 Jeep Gladiator, all 5 are included. The tires are a Falken Wildpeak A/T AT3W, sized LT285/70R17, load range C. As of now, these tires have 2,700 miles on them. They've been offroad a few times, but not abused. Included are the factory Gladiator wheels, which are built much heavier duty than the current Wrangler wheels, to meet the towing capacity. The wheels are 17 x 7.5's with a 5 x 5 bolt pattern. No rock/curb rash, both the wheels & tires look new.

These would be a nice upgrade to a non-Rubicon Wrangler or Gladiator, or get some wheel adapters and run them on an older Jeep.

20190825_160812-XL.jpg


20190907_125038.jpg

20190907_125053.jpg

20190907_125101.jpg

$1000, located in GJ, CO.
 
Last edited:

Greg

Make RME Rockcrawling Again!
Admin
Don't these wheels require 9/16" lug studs? I may be wrong, but I thought I heard that somewhere.

They're 14 mm studs on the Gladiator, but the taper is the same far as the nuts. They should bolt onto a JKU... I'm running JKU spec wheels on my Gladiator now. ;)
 
Top