Project: Pretty Hate Machine (4 seater buggy build)

Herzog

somewhat damaged
Admin
Location
Auburn, WY
Flex testing the front before welding in the shock mounts to support the chassis. I have to get it back to roller so we can move it soon. (Selling the current home!)

g8R3.jpg

dtgA.jpg
 

Herzog

somewhat damaged
Admin
Location
Auburn, WY
Cleaned up the front outers... I love fresh paint on these components
g3o9.jpg


Cleaned up wheel hubs, ready for new bearings
gPL6.jpg


Lowered the brake pedal 1.5". Previously set it up to my big feet in boots, now it's better suited for normal feet

gZ1U.jpg


Shifters clearance and overview. Still need to add a cutting brake
gfjg.jpg


Burned in the shock mounts:

gjKC.jpg

gnMD.jpg

g02u.jpg
 

Herzog

somewhat damaged
Admin
Location
Auburn, WY
And since we finally got all the parts to gear and setup the axles, I started on 14povertyBolt.

gXge.jpg


Chonky arb and thick gear needed more room
gB6X.jpg

goR7.jpg


First run matching original .020 pinion housing shims and ~0.06 backlash. Good enough for us poor people. :D

gN5n.jpg

gCLq.jpg


Make truss great again

gQFK.jpg

gInZ.jpg

g6KM.jpg

gYiz.jpg

g438.jpg
 

Herzog

somewhat damaged
Admin
Location
Auburn, WY
Last updates for at least a few months until I get settled at a new place. Kinda bums me out seeing her head home incomplete for now but the owner is going to pull the motor and transmission to have them rebuilt and prepped, and probably finish weld the entire chassis if he has time. Excited to see how far he gets on it!


Rebuilt the front wheel hubs:

gA6r.jpg


Fresh rotors

gGhH.jpg

gKRS.jpg


and rolling, ready for pickup.


gc5b.jpg
 
Top