Spacecase's 90' Toyota Pickup

Current mods:

85' front end
TG High Steer with 6 shooter knuckles
G2 30 spline chromoly axles and birfields
95-04 Tacoma Brake upgrade w/IFS Hubs (FROR)
6 stud hub mod
High pinion w/ARB air locker
Trail Gear steering assist w/stock tapped box.
TG upper gusset
TG diff armor
Marlin knuckle gussets
5:29's

IFS width rear end
V6 3rd w/ARB air locker
Trail Gear disk brake conversion
Longfield axles
LSPV delete
5:29's

Other Drivetrain Mods
TG 4.7 t-case gears
TG twin stick setup
All-Pro T-case E-brake.

3" Downey exhaust system
TG stainless header

battery and intake swap

1" bore master cylinder

Wheels/Tires
35x12.50/r15 Mickey Thompson Baja Boss
Battleborn Gatekeeper Beadlocks

Suspension
63" Chevy's, 4 leaf with overload (rear) General Spring
3" lifted all pro springs with low profile hanger, removed 2 lower leafs (front)
Boomerang shackles 4-3/4” front / 6”rear
Bilstien 5100 series shocks

Body & Armor
custom tube rear bumper (Sexton Offroad)
TG rock sliders
TG tube doors
TG front bumper
Custom built roll cage

14" bobbed bed

Misc. Additions & Stuffs
PRP seats & 4point harnesses
Grant steering wheel
Smittybilt winch
CB Radio


current pic..
90017A14-629D-4D54-9BA2-CC8FC7F357FC.jpeg
 
Last edited:

spacecase

Out Crawlin'
Location
SL, UT
forward progress on the build. got some corbeau seats for the rig, and a 85 4runner axle w/highsteer setup. also some used 32" BFG's. i have a line out on some 63" chevy springs, just need to grab em from Logan.. :eek:

20130308_165645.jpg

20130328_124803.jpg

20130211_183321.jpg
 
Last edited:

spacecase

Out Crawlin'
Location
SL, UT
decided to bob the bed..


took out 14" and so far looks like i will be able to keep my fender intact.
01.jpg

02.jpg

03.jpg

04.jpg

05.jpg

06.jpg

07.jpg
 
Last edited:

spacecase

Out Crawlin'
Location
SL, UT
Got the welding and grinding done. Also got it back on the truck.


Still need to bondo and paint. I'm gonna rattle can her black and get the bed rino-lined


Anyway, onto the pics..
20130618_201501.jpg

20130618_201511.jpg

20130618_210810.jpg
 
Last edited:

sixstringsteve

Well-Known Member
Location
UT
i am in love with your truck. I had bad thoughts about a similar truck today. 3rd gen single cab, 22re, 4.7's, 33's, and an aussie out back. I'd keep it IFS. I need to unsubscribe from this thread before something bad happens...
 

spacecase

Out Crawlin'
Location
SL, UT
thought this was cool so i'll share.


one of the employee's at my work snapped this photo of me welding the bed and posted it to our installs page.

gotta love the action shots.. haha
Image1.jpg
 
Last edited:

spacecase

Out Crawlin'
Location
SL, UT
Well, i spent the weekend of the 4th tearing apart the truck, sanding, washing, priming, painting, and puting it back together. I couldnt find a good flat red so i ended up buying a rustoleum red enamel. Other than the slight overspray from overlapping strokes i think it turned out good.
red1.jpg

red2.jpg

red3.jpg

red4.jpg

red5.jpg

What u guys think?
 
Last edited:

spacecase

Out Crawlin'
Location
SL, UT
fixed the paint with some turtle wax rubbing compound, i think it looks pretty damn good for a rattle can job. i'm happy with it.


took this pic at 5mile yesterday
15.jpg
 
Last edited:

spacecase

Out Crawlin'
Location
SL, UT
well i attempted to swap the 3rd from my front donor axle (welded carrier) that i will be using for my SAS, to my rear end, no such luck..

the gears are chewed up and gear lash is WAY out. no locker for me..

if anyone has a locked up 3rd with 4:10's they are willing to part with for cheap, hit me up. i was attempting to swap it before the snakes this weekend
 
Top