Toyota High steer pivot pins?

[88 Runner SAS]

I haven't posted here in forever, but I'm trying to figure out if anyone knows if I can get replacement pins for my high steer arms on my 1st gen 4runner? It had a run in with an 18 wheeler in Nebraska a little over a year ago and sheared the pin off in the top knuckle bearing. I've got an old school 4x4 labs crossover with one ton ends and I can't just replace the arms.

 

[cruiseroutfit]

Those pins are specific to the 4x4 Labs arms as I recall. It's possible the pins from the Marlin or Trail Gear could work, just depends what dimension they use where it presses into the arm, nothing is 'standard'.

Have you tried calling Luke @ 4x4 Labs. He may be willing/able to sell you new pins for your arms or at least verify dimensions.

 

[88 Runner SAS]

Trail gear says they won't sell the pins individually. I emailed 4x4 labs and haven't got a response yet, I will call Luke tomorrow and see if they can help. I looked at Marlins pins, I suppose I could buy that set and have the arms bored to fit the larger pins if nothing else.
Thanks for the info!