Turning my tow rig into an expedition camper

Our old camper was destroyed when one of the jacks failed. So we stripped it of all the appliances, and goods on the interior and planned to build a tough off- road camper that would take a beating and be more roomy than a traditional slide in camper. I also wanted the camper to be removable so that the truck can be used for other things.

I have to get this camper all put together before Easter Jeep Safari. So I have only a few weeks. This truck tows a trailer with our Dodge T-Rex 6x6, or pulls our Jeep behind it. The Truck is a GMC 5500 4x4. I first built a custom winch bumper for it and put in new exhaust.

Now I took it up to my buddy's shop in Idaho: Casper Customs. Cory the owner builds ultimate 4x4's and extreme rock buggies. You may have seen some of his work in TTC.

Well, this would be the first camper for Cory and I. But I new that we could do it.


First i built a winch bumper for the truck. Here is the truck as Cory's shop in Idaho.

38654904054_large.jpg



Next we laid out the fram as I had designed it.


38654904003_large.jpg



Here is Cory starting to weld up the frame.

38654904005_large.jpg



Here is the frame coming together:

38654904008_large.jpg




Now piecing and cross memebers:

38654904010_large.jpg
 
Last edited by a moderator:

sprueitt

sprueitt Dodge T-Rex 6x6
Next installment:

38654904011_large.jpg



38654904014_large.jpg


My daughter is a welder so I have to show her my welds.:p

38654904015_large.jpg


Cory fabing up the Jack mounts

38654904016_large.jpg


Cross bracing
38654904017_large.jpg


Some of Corys nice work

38654904019_large.jpg


Does it look like a camper yet????:rofl:
 

sprueitt

sprueitt Dodge T-Rex 6x6
Almost done with the siding, Pre drilling and then setting in screws is hard on your arms.... 568 down..... 247 to go....:eek:


38654904034_large.jpg



38654904037_large.jpg


Time for the corner and roof flashing.


38654904039_large.jpg





38654904042_large.jpg


Next the Jacks.
 

benjy

Rarely wrenches
Supporting Member
Location
Moab
Custom built camper... that's ambitious, I'm thoroughly impressed! I'll be watching closely, as I need to start my enclosed trailer -> toy hauler conversion soon :cool:
 

sprueitt

sprueitt Dodge T-Rex 6x6
What do you expect that thing to weigh?
Our last camper wieghed 2800lbs and that was made out of wood crap. I expect this one to weigh about 3000. I have 848 lbs of steel and 500lbs of aluminum. I an up to 1348 so far, and next goes in cabinets, flooring, insulation, and pluming.
 

sprueitt

sprueitt Dodge T-Rex 6x6
Now on to the truck:


38654904055_large.jpg




Looking good:



38654904057_large.jpg








38654904060_large.jpg







Now on to windows, flooring, and interior. its off to a great start.:)
 

mbryson

.......a few dollars more
Supporting Member
NICE, now to the interesting stuff. :D (not that the other stuff isn't interesting---I've thought more than a few times about doing that to my flatbed trailer to invent it into a toyhauler)
 
Top