weber carb

[redrock]

i have a weber carb that needs some final touches and i don't know enough about them to do it does anyone no anyone that does

 

[Pathos]

Which weber and what needs to be done?

 

[redrock]

hey patho thanks for getting back it is 300cfm for 4.2 it runs rich and i called weber and they said i need to rejet but they said its not like jet there more like mix screws but i don't want to screw anything up and nobody around here knows anything about them do you know anything

 

[Pathos]

Sounds like a 32/36 DGV and ifso then there are 3 sets of jets

(primary/secondary main
.40mm/1.35mm,
primary/secondary idle
.55mm/.50mm
primary/secondary air correction
1.65mm/1.60mm)

IMO the best place to start is with a clean rebuild then go from the base setting of 1 turn in on the idle and 2 turns out on the mixture. then adjust mixture by ear. you'll be looking for it to just start sounding rough then go back till the idle smooths and another 1/4-1/2 turn.

 

[Pathos]

forgot to mention the only jets that can be easily replaced w/o pulling the carb apart are the main jets.

 

[Moon]

so go buy those jets with those specs put them on then ajust the mixture like he said. an lets go find some rocks oh and lets fix our gas tanks.