- Location
- Grand Junction, CO
Trying to plow snow that's the consistency of wet concrete... didn't turn out well. That machine weighs around 40,000#'s.
Work screw ups...
- Thread starter Greg
- Start date
STAG
On my grind
- Location
- Pleasant Grove
Grandpa Gardner with his hands on his hips
- Location
- Grand Junction, CO
Locomotive breeding season...
- Location
- Vehicular limbo
In Arizona, my techs have to deal with 115* degree heat, monsoons and flash floods, packrats and rattlesnakes in the cross box. In Portland, the occupational hazards are a little different.
- Location
- Grantsville, Utah
Oh how I wish I could show you some pics from work.
Your job is still easier than a Swift trainer
STAG
On my grind
- Location
- Pleasant Grove
Just got these sent to me. This is the company I worked for back in Hawaii. I don’t recognize that driver and at a company that’s only 10 people big I would have known him, so he’s been there for sure less than 6 months. Other than that I don’t have any details.
- Location
- Grand Junction, CO
Did he take the turn a little too hot?
STAG
On my grind
- Location
- Pleasant Grove
I talked to one of the guys and he told me he has a reputation for driving too fast in general, so probably.
He also told me the guy was fired on the spot.
Last edited:
Corban_White
Well-Known Member
- Location
- Payson, AZ
Just trying to clean off the trailer deck! 
Also, it looks like it was at least tied down well!
Also, it looks like it was at least tied down well!
STAG
On my grind
- Location
- Pleasant Grove
Luckily it was one of their oldest machines. I talked to the owner, the driver had only worked there 3 weeks.Just trying to clean off the trailer deck!
Also, it looks like it was at least tied down well!
The only real damage to the unit is it needs a new fuel tank ordered.
STAG
On my grind
- Location
- Pleasant Grove
- Location
- Grantsville, Utah
I have nightmares about this stuff with new drivers, lately.
- Location
- The Village of Kay
Whoops!
Did you call the Utah offroad recovery team?
- Location
- Sandy, Ut
Chance to use the snow cat, and about 85 snatch blocks for pulling ratios..
STAG
On my grind
- Location
- Pleasant Grove
We got them both out.
The D8 got stuck trying to pull out a stuck scraper.
I got the scraper out, and then got stuck trying to pull the D8.
My D6 eventually got out on its own but the D8 took a little more work.
The D8 got stuck trying to pull out a stuck scraper.
I got the scraper out, and then got stuck trying to pull the D8.
My D6 eventually got out on its own but the D8 took a little more work.
- Location
- Vehicular limbo
What are the masts attached to the blades?