Diesel_Zuk's latest activity

  • D
    Cut up some new frame fish plates with a rosette weld hole. Started mocking up my tcase position, moving it back about 6” from stock.
    • FBC56ED3-62D0-4DF0-9AA3-3489112EF4F3.jpeg
    • 9340522A-C8AE-465D-9EBD-1B5CB27B2679.jpeg
    • 2FF3BA04-8140-4248-852F-ED5953F1B4BB.jpeg
    • F5D5F9A7-453E-4803-B612-F338820792F2.jpeg
    • AFA675D0-DDF8-4626-A2B1-5A9AC87D5FAD.jpeg
  • D
    Looking for a stock pair of FJ80 (or similar) front radius arms if anybody has some?
  • D
    Diesel_Zuk reacted to I Lean's post in the thread Radius arm basics? with Like Like.
    Sure...2 5/8" wide, 5/8" bolt (Jeep is 9/16 bolt). 2.25" diameter with a slightly larger step at one end. They press into 2.75" .25"...
  • D
    Diesel_Zuk replied to the thread Radius arm basics?.
    Happen to know the dimensions of those bushings off the top of your head?
  • D
    Diesel_Zuk reacted to I Lean's post in the thread Radius arm basics? with Like Like.
    Frame and axle side use the same bushings, which are lower control arm bushings for a mid-90's Dodge truck. They are the same outside...
  • D
    Diesel_Zuk reacted to bryson's post in the thread Radius arm basics? with Like Like.
    The arms pictured are not mine, but I do have a set of 80 series Cruiser arms that are not currently being used. Shoot me a PM and we...
  • D
    Diesel_Zuk replied to the thread Radius arm basics?.
    Wow, those are some beefy looking units! What kind of joints are you using on the frame side there?
  • D
    Diesel_Zuk reacted to I Lean's post in the thread Radius arm basics? with Like Like.
    I too wanted adjustability, so this was my solution. I use rubber bushings at all points, but the frame attachment is in a threaded...
  • D
    Diesel_Zuk reacted to Herzog's post in the thread Radius arm basics? with Like Like.
    With radius arms, your axle becomes the swaybar ;) :D
  • D
    Diesel_Zuk replied to the thread Radius arm basics?.
    Good to know, I suppose for how many there are out there that would make sense. So, does anybody happen to have a set of FJ arms they...
  • D
    Diesel_Zuk reacted to spaggyroe's post in the thread Radius arm basics? with Like Like.
    I believe there are a lot of options for caster correction on an 80 series landcruiser, so if you simulated the toyota style axle...
  • D
    Diesel_Zuk reacted to bryson's post in the thread Radius arm basics? with Like Like.
    I think you're thinking way too hard about all of this. Run a very simple radius arm setup like on the front of solid axle, coil sprung...
  • D
    Diesel_Zuk replied to the thread Radius arm basics?.
    Very small, bushings are small and I don't believe you can even buy them anymore, unless somebody sells a universal one that will fit...
  • D
    Diesel_Zuk reacted to spaggyroe's post in the thread Radius arm basics? with Like Like.
    Also, curious about what makes the sammy sway bar junk? I have no experience with them. Are they just considered junk off road, or is...
  • D
    Diesel_Zuk reacted to spaggyroe's post in the thread Radius arm basics? with Like Like.
    What he said. Those radius arms would add some style for sure. The "under the axle" mounting would probably be a good way to go too...
Top