The_Lobbster

Test bracket from thin gauge. I mismeasured again, shocking, I know! Base to bottom of bracket is almost 24”. Now I just need somebody...

Looks like somebody spotted you

I suck at math in my head, the rafters would be 7' 4" on center roughly, not 5'. I would have some sort of purlins, or something, with...

Which leads me to what will essentially be a carport. 4” channel for the roof, with 4 trusses over the length of building, so 5’ O.C. I...

This project got put on hold, realized the wood shed I got for free is more junk than good. I can salvage about 75% of the OSB siding...

Yesterday and today I finished putting on the roof cross beams on that "barn extension" thingy I've been building in Park city.

Ozone machine works. Boss bought a DNR truck and it cleaned it right out. Can’t tell at all now

An ozone machine will 100% remove all smells. At least mine does, which is a "commercial" unit that I picked up a while ago used on KSL...

Cut out the cracked steel on my drivers side motor mount and covered it up with metal.

This one has been sitting in the same spot for the last couple years near me. After seeing this thread, I looked over at it today to see...

I have a similar amount of lawn. I had a riding mower for many years along with a trimmer, edger and 21" walk behind. I now pay $35/week...

BIL turned down my T5 input shaft for me this week. Before: After: And now it appears to fit all of the way thru the DMF...

One of these would probably be cool.... @Finish a dang project Greg

If you’re still looking, I have a pair of Bilstein TJ front shocks. Good condition, valving just isn’t correct for my Suzuki project...