Complete stand alone TPI system. Includes upper and lower intake, throttle body, sensorsn distributor, stand alone painless harness and computer, air intake tube and filter
$450 obo
Located in Las Vegas
Mike
702-426-6424
I have a pair of Bilstein 2.5" reservoir coilovers 10" travel includes dual rate & springs. I believe the springs are 450 over 600
$550 obo
A pair of King 2.0 x 14 reservoir shocks. Don't leak but will need to be charged.
$275
Located in Las Vegas
Mike
702-426-6424
I have a custom made UTV buggy. Designed for teenagers really but I'm able to fit (I'm 6'1")
Main cage is made up of 1.5" x .120 wall DOM tubing. with some 1.25" & 1" tubing as bracing.
It has a motor and trans are from a Yamaha 450 wolverine with an automatic trans. It is 4 wheel drive (4x4)...
H1's w/ 36's
I have two sets of wheels
H1 8 bolt beadlocks with mag run flats. with 36x12.5 good years mounted on them with 80+% tread
$550
Also interested in trades
Located in Vegas
Mike 702-426-6424
1975 Jeep DJ5. It's an old Postal delivery jeep.
Truck is complete. Running & driving. Has a jeep 258 inline 6 that was swapped in and an auto tranny. recent tune up and regular maintenence on the motor. Clean Title
Moving and don't have room for it.
$2,000 OBO or trade.
also have parts to...
I have an Auto Tranny and 241J Transfer case with the 4:1 out of an 08 JK Rubicon. Had 60k miles on it. Pulled to swap an LS 4L60 and Atlas combo.
located in las vegas
1,200 for the t-case
300 for the tranny
or $1,200 for both OBO or trade for something
Gilbert
702-326-9249
Have a set of 5, 17 x 9 Aluminum Beadlocks with black rings. Drilled for 5/8 studs lug pattern is 5 x 5.5
Don't remember the brand.
I'll throw in 2 39" iroks good for spares or what ever. or sell them seperate for $100
Located in Las Vegas.
$900 obo may be interested in trades or partial trades-...
Complete Ford Kingpin Dana 60. Hub to Hub. dual stabalizers. high steer arm on the passenger side. 4.10 gears.
Located in Las Vegas
SOLD
Gilbert
702-326-9249
I have 2 FOA 2" travel bumps. First batch from FOA. The tops were tig welded on. included cans. SOLD
2000 4.3 vortec stock wire harness and computer. $100
Smog legal vortec 4.3 stand alone wire harness. Also have a stock computer to go with this. was going to put it on a 2000 4.3 went with...
Picked this up a while ago and haven't posted anything so here is a quick build.
How I picked it up. High pinion 44 front 9" rear on 35's 5 or 7" springs front. and 52" chevy springs rear.
crossmember
Took off the front leafs. Went to 3 link with a panhard. and hydro assist. 14"...
I have a set of 4 Super Swamper SX with 90%+ tread mounted on 15x8 MRW beadlocks. Lug Pattern is 5x5.5
Tires aren't dry rotted and barely used.
$1000 OBO
Or will sell wheel and tires by themselves.
Beadlocks - $500
Tires - $600
General Grabbers - SOLD
Located in Vegas.
Mike
702-426-6424
Front and rear axles out of my CJ5.
Dana 30 Front with dana 44 outers. with high steer arms.
Set up for spring over. 3.73 gears
Dana 44 rear with traction bar set up. Heavy Duty diff cover.
set up for spring over. 3.73 gears with a locker in it.
$400 for the set.
I also have a set of...
Brand new RCI 32 Gallon Fuel Cell
It has never been installed, has a few scratches on the bottom of it, but otherwise brand new.
Dimensions: 26" Long, 18" High, 18" Wide.
I also have 10 bricks of brand new foam 8"x8"x4"
$275.00 OBO for everything
Located in vegas
94 Jeep YJ
5.7 350 sbc stock with headman headers with tbi fuel injection
Dual exhaust with flowmasters
Turbo 350 trans rebuilt with shift kit and B&M shifter
Doubler 203-205 transfer cases with WMS adapter and ORD shifters
Dana 60 front 4.56 gears, welded spider gears, 1330 joints, full...
Buggy chassis made of 1.75" and 1.5" using part of a toyota frame from motor mounts to behind the seats. setup for 350-TH350-Dana300. I have a 350 brand new rebuilt needs to be put together. TH350 tranny and dana 300 t-case with cable shifters. PRP Seats, most of the firewall and floor done...
Need parts to finish my buggy
Orbital column
tbi harness, Stand alone or complete stock
Double ended ram
Radiator
taurus fan
seats
th350
Maybe other parts
Located in vegas
I have a 2x8" hydro ram 1 1/8" diameter shaft and two 48" new hydro lines all from surplus center. Ram has tube welded in the ends to fit a 3/4" bolt. I bought this off the board and I'm going with a dual ended ram.
https://www.surpluscenter.com/item.asp?item=9-6070-208-AG&catname=hydraulic...
This has been sitting in my garage for years as I have been having knee surgeries. Now that I'm done with that I'm finally building it. Still need to pressure wash the sand off of it. But most of it's on my garage floor now. 1 tons 350-TH350-Dana 300. Linked rear. those are the plans so far...