my4x4hofnar
Member
- Location
- West Valley
I'm selling my 1997 Jeep Grand Cherokee. I was originally building this Jeep to be on 1 ton axles and 40's but plans changed and I decided to build a TJ instead.
172,000 miles
5.2L V8
Dana 30 front axle with 4.56 gears and cromo shafts
Dana 44a rear axle with 4.56 gears (used Aussie locker not installed)
NP242 J transfer case
6 inch long arm lift
Rock sliders
Frame stiffeners
I also have a bunch of random spare parts that will go with the Jeep. Some of which include: spare front and rear axle shafts, NP249 transfer case and a tow hitch.
The Bad.
The Jeep does have a Rebuilt/Restored title. The transmission mount bushing is a bit worn and the rear output shaft seal on the trans needs replaced (which I have but never got around to replacing). The AC has also been pulled off the engine.
$3000.00
172,000 miles
5.2L V8
Dana 30 front axle with 4.56 gears and cromo shafts
Dana 44a rear axle with 4.56 gears (used Aussie locker not installed)
NP242 J transfer case
6 inch long arm lift
Rock sliders
Frame stiffeners
I also have a bunch of random spare parts that will go with the Jeep. Some of which include: spare front and rear axle shafts, NP249 transfer case and a tow hitch.
The Bad.
The Jeep does have a Rebuilt/Restored title. The transmission mount bushing is a bit worn and the rear output shaft seal on the trans needs replaced (which I have but never got around to replacing). The AC has also been pulled off the engine.
$3000.00