For Sale - Best Offer 4Runner 1999 seats - fits 95-04 Tacoma 50$

[Jeeputah]

Selling these bucket seats. Driver seat has tear. I'll throw in the rear seats so you can take it to reupholstery place and fix with same fabric.

http://www.ksl.com/index.php?nid=218&ad=33863818&cat=&lpid=2&search=Seat&ad_cid=2

 

[juhcohbee]

do these bolt directly in or do they require fabbing for a 02 tacoma

 

[Jeeputah]

They will bolt right in according to a write up on customtacos.com. But it refers to 98 4Runner seats and they were transplanted into a 01 Tacoma. I know the 4Runner seats didn't change 98 to 99. So if nothing changed from 01 to 02 in the Tacoma they should fit perfectly.

 

[Jeeputah]

It says that some of the 4Runner to Tacoma seats 3 of 4 bolts will line up perfect then you just have to drill a new hole for the last bolt. Which Is better than doing a custom fab messing with brackets and tracks and stuff.

 

[BlueWolfFab]

Sixstringsteve did it in a '97 Tacoma but I'm not sure all what it took to do it?

 

[juhcohbee]

dang im really interested, i hate the seats in my truck..

 

[Jeeputah]

http://www.customtacos.com/tech.old/index.php?article=168

here is the forum post on the transplant. Stop by we can drop them in your Tacoma and see if they fit, I have all the tools needed to take care of the job if we need to drill a new hole too.

 

[juhcohbee]

http://www.customtacos.com/tech.old/index.php?article=168

here is the forum post on the transplant. Stop by we can drop them in your Tacoma and see if they fit, I have all the tools needed to take care of the job if we need to drill a new hole too.

sounds good. ill pm u my number and we can figure out a time.

 

[Spork]

I can get some pictures if you want, basically he replaced the bench seat and was able to use 3 of the existing holes and drilled out the one by the tunnel and just stuck a bolt through it.

 

[Jeeputah]

did he use nut and bolt? Or did he thread the new hole with the bolt?

 

[Spork]

did he use nut and bolt? Or did he thread the new hole with the bolt?

Nut and bolt.

 

[BlueWolfFab]

A Rivnut would be a great way to go too.

 

[Jeeputah]

Seats are still available.

Juhcohbee ended up passing on the seats because the passenger side seat doesn't have a lever to get out form the back of his extra cab.

 

[Jeeputah]

I just shampooed the seat and got the stains out. I'll repost pictures on the KSL add. I also greased the sliders and repainted the feet to prevent rust.