Two 1" CNC master cylinders with hardly any use. They have been sitting for about 2 years
$40 pics tomorrow
Ruffstuff 7/8" heims with stainless 3/4" misalighnments and weld in bungs made for 1.5"id tubing (I used heims the same size for lower arms on my xj and I might have bushing material if you want to do this)
$40
3/16" Thick tabs with 1/2" hole (four total)
$10 for all
1/8" Thick tabs with just under a 1/2" hole that needs to be finish drilled (6 total)
$10 for all
Quick release fire extinguisher mount with weld on base. pull the pin and slide the extinguisher out. Fire= BAD! extinguishers on your vehicle=GOOD!
$30
Brand new ranger lower ball joints. http://www.tahiko.com/product/7252
$15 for both
txt is best or leave a voicemail
801six 94 five 82 five
Chadwick
$40 pics tomorrow
Ruffstuff 7/8" heims with stainless 3/4" misalighnments and weld in bungs made for 1.5"id tubing (I used heims the same size for lower arms on my xj and I might have bushing material if you want to do this)
$40
3/16" Thick tabs with 1/2" hole (four total)
$10 for all
1/8" Thick tabs with just under a 1/2" hole that needs to be finish drilled (6 total)
$10 for all
Quick release fire extinguisher mount with weld on base. pull the pin and slide the extinguisher out. Fire= BAD! extinguishers on your vehicle=GOOD!
$30
Brand new ranger lower ball joints. http://www.tahiko.com/product/7252
$15 for both
txt is best or leave a voicemail
801six 94 five 82 five
Chadwick
Last edited:
