wallysheata
Registered User
- Location
- Aspen/Grand Junction, CO
35 Spline 60 rear, & Dana 60 Detroit Locker $1,500
Would like to sell as a package, all axles are stock, the front is from an 80's ford, so it's drivers side drop, king pin with 35 spline inners 30 spline outters. The rear is a stock 70's ford with no inner shafts. I have a set of Yukon 35 spline shafts for it, so the spindles will need to be bored out to accept the larger 35 spline shafts, and the detroit locker is a 30 spline detroit, so the side gears will need to swapped out to accept the 35 spline shafts. Was planning using these but don't see putting them to use any time soon, so figured i'd just let em go for what i've got in em. At this time not willing to separate so $1,500 for everything, but if I end up separating the price break out is as follows:
Front 60 - $1,000 - SOLD
Rear 60 w/shafts - $350
Detroit - $350
Everything is located in Grand Junction, CO and I've got an engine hoist to help load the axles.
Would like to sell as a package, all axles are stock, the front is from an 80's ford, so it's drivers side drop, king pin with 35 spline inners 30 spline outters. The rear is a stock 70's ford with no inner shafts. I have a set of Yukon 35 spline shafts for it, so the spindles will need to be bored out to accept the larger 35 spline shafts, and the detroit locker is a 30 spline detroit, so the side gears will need to swapped out to accept the 35 spline shafts. Was planning using these but don't see putting them to use any time soon, so figured i'd just let em go for what i've got in em. At this time not willing to separate so $1,500 for everything, but if I end up separating the price break out is as follows:
Front 60 - $1,000 - SOLD
Rear 60 w/shafts - $350
Detroit - $350
Everything is located in Grand Junction, CO and I've got an engine hoist to help load the axles.
Last edited:
