A couple Cruiser builds

Sawtooth

Hagisch
Location
Holladay,Utah
So I have a '71 FJ55 and a '77 FJ40 and thought I would start a small thread on their builds together.I've had the 55 about a year and a half and the 40 about 10 months,both were scavenger finds that turned out to be pretty good trucks.I've done some work on each of them,but they both have a long way to go.Since I am starting a little late with the thread,I will just pick up where I am now with them.Thanks for the killer forum! Matt
Just got new steelies and SS's on the 40
 

Attachments

  • DSCN0747 (Copy).jpg
    DSCN0747 (Copy).jpg
    98 KB · Views: 23
  • DSCN1535 (Copy).jpg
    DSCN1535 (Copy).jpg
    109.3 KB · Views: 29
  • DSCN1537 (Copy).jpg
    DSCN1537 (Copy).jpg
    155.5 KB · Views: 28

Sawtooth

Hagisch
Location
Holladay,Utah
Of course,the green guy was also used for parts
 

Attachments

  • DSCN0492 (Copy).JPG
    DSCN0492 (Copy).JPG
    84 KB · Views: 8
  • DSCN0926 (Copy).jpg
    DSCN0926 (Copy).jpg
    122.1 KB · Views: 10
  • DSCN0929 (Copy).JPG
    DSCN0929 (Copy).JPG
    97.3 KB · Views: 11
  • DSCN0889 (Copy).jpg
    DSCN0889 (Copy).jpg
    122 KB · Views: 11

Sawtooth

Hagisch
Location
Holladay,Utah
I built some sliders a few weeks ago and now I could really use a tire carrier and extra fuel storage.I picked up some spindles from IPOR and got to work.This is what I was able to scrap together.I think it will work out nicely.Looking for a draw latch to hold everything down.Anyone know of a local latch supplier?Grainger may be where I check first.
 

Attachments

  • DSCN1464 (Copy).jpg
    DSCN1464 (Copy).jpg
    133.3 KB · Views: 5
  • DSCN1578 (Copy).jpg
    DSCN1578 (Copy).jpg
    99.9 KB · Views: 5
  • DSCN1579 (Copy).JPG
    DSCN1579 (Copy).JPG
    94.6 KB · Views: 5
  • DSCN1580 (Copy).jpg
    DSCN1580 (Copy).jpg
    109.3 KB · Views: 5

Sawtooth

Hagisch
Location
Holladay,Utah
Finished the rear bumper,zerked the spindles,and mounted the De sta co latch to hold everything down tight.The 40 also got a stereo for Christmas but needed some speakers.Had a couple of old KC's layin around,so I fitted them with some 5 1/2" speakers that I got at the DI,then mounted em to the rollbar. Now we are rockin"
 

Attachments

  • DSCN1662 (Copy).jpg
    DSCN1662 (Copy).jpg
    104.7 KB · Views: 5
  • DSCN1665 (Copy).JPG
    DSCN1665 (Copy).JPG
    66.5 KB · Views: 5
  • DSCN1641 (Copy).JPG
    DSCN1641 (Copy).JPG
    78.2 KB · Views: 7
  • DSCN1668 (Copy).JPG
    DSCN1668 (Copy).JPG
    54.9 KB · Views: 12
  • DSCN1667 (Copy).JPG
    DSCN1667 (Copy).JPG
    43.8 KB · Views: 7
Top