anybody have a foot of 1 3/4 x 3/8 wall dom?

[KrazyKarl]

I need a foot of 1 3/4 x 3/8 wall dom. anybody have a piece I can buy off them?

 

[I Lean]

Does it have to be 3/8" wall? I have some .219 wall for sure. There is a chance I may have some .375, but that will be left over after I get the suspension done on my Willys, which may be a while.

 

[KrazyKarl]

yea, Its for a part at my work and the id has to be the 1". we only need 7 1/2 inches or so and the boss doesn't really want to buy a full stick from Marmon.

 

[Erik d_lux]

And o.d. has to be 1.75"? I know for sure I have 1.5 x .25 around. Could you sleeve the 1.5 with some 1.75 x .120 and be good?

 

[mierdota]

if you can sleeve it i also have some 1.5x.25 wall and 1.75x.120 wall ill give you the 1.75x.120 wall for free and give you the other and weld it in for cheap if you need me too. give me a call ill be at our shop till noon tomorrow 801-657-1938

 

[KrazyKarl]

thanks guys, I ended up just drilling a piece of cold rolled 1018 and boring it out and turning down the od.