built yota and built waggys

zukijames

Well-Known Member
Location
not moab anymore
here is a quote from the sale ad for the rig the waggys came out of.

"D44 with chromo shafts in and out, ctm ujoints, detroit and 5.89 yukons. set up for high steer and 1 ton Tre's. Wilwood disc brakes, this axle came out of a comp buggy and is as beefy as you can make one. Diff guard as well.

Rear is also a D44 with Dutchman shafts and detroit, with 5.89s as well. Wilwood disc brakes.
extra short side shaft for it."


IMG_1021.jpg

IMG_1022.jpg

IMG_1023.jpg

IMG_1024.jpg


1000 obo!!!!

yotas
front:
arb with 5.29s, dirty 30 axle shafts
front axle was rebuilt (minus dif) in april.
marlin outer seals, longfield HD wipers!
trailgear dif armour& truss
a toyota mini axle that doesnt leak out of the knuckles .
comes with a few extra hubs 4 extra knuckles
extra bearings extra seals .
not that you will ever need them i slowly kept collecting parts just in case. never had to use them these are tough axles!

IMG_1025.jpg


rear:
pre-ifs axle (same width as the front) except v6 3rd with 5.29s and arb
lots of trussing even has a spot to hook your suspension winch :)

IMG_1026.jpg


$1500 obo!! as you can see it is still under the rig so let me know and i'll get pulling it. will also throw in some wheel spacers if close to asking price

8018859813 call or text any time both sets are great axles but i couldnt handle my gf having dana 60s and me having small axles so im going bigger.

thanks for looking
 
Last edited:

Marsh99

Lover of all things Toyota
Location
Mantua UT
I might be interested in the 3rds... I have some I could replace them with 4cy 4.88 with Arb and other Detroit.
 
Top