Lifelong Jeeper
Well-Known Member
- Location
- Murray
Open to offers and trades. Help me recover financially from my fight with cancer earlier this year.
NP231 - 23 spline, slip yoke, needs work. Makes noise but I'm not sure what it is since I haven't opened the case. Could likely just be in need of a rebuild. I have a used SYE kit that is included. $125
27 Spline input gear from a NP241 (pre 1994 gear cut). This will work in a NP231 too for those of you doing GM engine/trans conversions. $30
ZJ rear driveline with Slip Yoke. $40
TJ front driveline with new ujoints. $75
Approx 38" CV Style rear driveline $75
Many Dana 300 parts:
*Front Yoke $30
*Rear Yoke $30
*Shift Rails with bearing housing $75
*Shift Forks (2) $40
*23 spline input shaft, seal, and bearing $50
*Rear output shaft with bearings speedo housing etc. $150
*Speedo pickup $20
*Inspection plate $10
*Single shifter handle with knob $10
*Front output bearing plate and shims $15
*Random bolts $5
*Rebuild seal/shim kit complete minus front output seal $15
That's all for now but will post more as I think of it.
NP231 - 23 spline, slip yoke, needs work. Makes noise but I'm not sure what it is since I haven't opened the case. Could likely just be in need of a rebuild. I have a used SYE kit that is included. $125
27 Spline input gear from a NP241 (pre 1994 gear cut). This will work in a NP231 too for those of you doing GM engine/trans conversions. $30
ZJ rear driveline with Slip Yoke. $40
TJ front driveline with new ujoints. $75
Approx 38" CV Style rear driveline $75
Many Dana 300 parts:
*Front Yoke $30
*Rear Yoke $30
*Shift Rails with bearing housing $75
*Shift Forks (2) $40
*23 spline input shaft, seal, and bearing $50
*Rear output shaft with bearings speedo housing etc. $150
*Speedo pickup $20
*Inspection plate $10
*Single shifter handle with knob $10
*Front output bearing plate and shims $15
*Random bolts $5
*Rebuild seal/shim kit complete minus front output seal $15
That's all for now but will post more as I think of it.
Last edited: