drilling a pitman arm

[y-jake]

does anyone on here have the tapered drill bit for a pitman arm? i need to drill my jeep pitman out to chevy 1ton specs. if anyone would let me borrow it or do it for me or let me know where i could buy one that would be super.:greg:

thanks
jake

 

[Meat_]

It's a reamer. And no

 

[Badger]

there is a place in SLC that sells them as for the name i can't remember it.try calling 6 states

 

[Hickey]

Industrial Supply has them.

 

[Shawn]

Industrial Supply has them.

That is where I bought mine... like $25.00 or so..

 

[Meat_]

Make sure to predrill it. And to run the reamer slow with oil.

 

[Hickey]

Make sure to predrill it. And to run the reamer slow with oil.

That's for sure. It will chatter like crazy if you don't predrill it large enough.

 

[tv_larsen]

I bought and used this one, it worked great.

 

[N-Smooth]

where is industrial supply and do you mean to predrill it to the smallest size of the taper, right?

 

[Meat_]

where is industrial supply and do you mean to predrill it to the smallest size of the taper, right?

Predrill it to the size of the threaded part of the draglink end

 

[Shawn]

1700 S 300 W