Ford 31 Spline 9"

[Raleigh]

This is the axle out of my '78 Bronco, it is in good shape and has newer bearings and inner seal upgrade.

I am going to one ton axles so this is not needed.

**Shocks not included**

$100 OBO

http://www.ksl.com/index.php?nid=218&ad=19927314&cat=594

 

[UNSTUCK]

What gears, locker and whats the wms width?

 

[Raleigh]

3.55 gears, open, full width 68.5"

 

[Destroyer]

I thought the Bronco 9" was 65"
I wish this was up a mouth ago, I paid $100 for a disassembled one that needs seals.

 

[UNSTUCK]

I saw your ad for the front too. I know the housing is junk, but did it have the cast wedges? I'm guessing it does. I may need some inner C's.

 

[Raleigh]

It's possible on the EB is was 65", on the FSB the track width is 68.5.

Josh, I started cutting off the wedges on the front before I noticed the crack, but the knuckles and inner C's are still there and in good shape.

 

[Destroyer]

Eb is around 59" but either way this is a good deal and I wish it was up earlier.

 

[bryson]

78-79 Bronco rear is 65" wide. The front 44 will be 68.5" or so.

 

[Raleigh]

Interesting, I never measured it but thought the track width on the 78/79 was the same front to rear!

Thanks for schooling!

 

[UNSTUCK]

Do you still have the front shafts and if so, what the spline count on the outters?

 

[UNSTUCK]

Ok, give me a total price on this axle and the shafts and hubs/lockouts of the 44. Thanks.

 

[natas]

is this still around ?

 

[Raleigh]

Still have this if anyone wants it, $50

 

[oxbronco]

Do you still have it, im interested.

 

[Raleigh]

Yup I do, call or test 801-680-eight five eight one.

 

[natas]

do you still have it and if so need anything in trade ?

Yup I do, call or test 801-680-eight five eight one.

 

[natas]

hello ?

 

[Maverick]

Still have it? I may be interested in the 3rd member, need it for the relic rig. 3.55? I didn't count the splines when I had the axle shaft out, I'll have to check.

Oh, wow, just noticed that it's for a 78-79 FSB...even more interested.

 

[neagtea]

I thought the Bronco 9" was 65"
X2 only vans were wider but more right offset.

 

[Raleigh]

hello ?

Sorry, didn't see this!