how long is your tie rod and drag link on xover steering?

[beasttoyota4x4]

i'm getting my stuff ready and i need to know how long to cut the tube.

either with heims or with chevy 3/4 ton ends!

thanks.

going on all pro hysteer and using a toyota ifs box!

 

[beasttoyota4x4]

alright here is what i found out:
if you are useing heim joints:
drag link= 36"
tie rod=42.5"

if you are using fj80 rod ends:
drag link= 33.5"
tie rod= 44.25"

you should use 1.25" tube with a side wall of .25.
the heim joint incerts should be 3/4" inch with the heim joint having a 5/8" male end

i answered my own question. well almost! i got my answer over on por4x41

 

[Skyetone]

welcome to the board. I coulda helped But I am really buisy in the shop lately. Not online alot lately.....

 

[beasttoyota4x4]

thats okay. thanks. its almost to nice to not get flipped off for being new! if you know what i mean.

i thought everyone would like to know the size.

maybe one of these days i can make it down to moab with my truck.

 

[Too Far]

A little late for this one, but I have a rockstomper tie rod for allpro highsteer and fj80 ends that I bought but wasn't able to use. It's been collecting dust for a year now. Make me an offer if you need it.

 

[pjr]

Originally posted by Too Far
A little late for this one, but I have a rockstomper tie rod for allpro highsteer and fj80 ends that I bought but wasn't able to use. It's been collecting dust for a year now. Make me an offer if you need it.

Is it sleeved or un-sleeved?