Klune V

[flexyfool]

4:1 ratio. 23 spline transmission input with 6 hole circular bolt pattern. 6 spline transfer case output with "Texas" bolt pattern adapter plate. It has never been run -- just sitting in my shop for years. $500. This is small enough and light enough that it could be shipped UPS. There are probably many creative ways to use this, but the output needs an 18/20 case which is passenger side drop so you can't slam it between, say, an AX15 and NP231 or make it work with the more common driver side front diff. If you could, I'd be asking a lot more. My best thought is to replace a Dana 300 with this and a Dana 20.

 

[UNSTUCK]

I PMed you a few days ago about this. Did you get it? I'm very interested in it.

 

[flexyfool]

I PMed you a few days ago about this. Did you get it? I'm very interested in it.

It will be $42 to ship to 84044.

 

[flexyfool]

P.S.: The transfer case adapter is for the small bore 3 5/32" Spicer 18. A simple ring would have to be machined to use the adapter with the large bore 4" Spicer 18 and Dana 20 cases.