HELP. After putting flat fenders on my 06 TJ I realized I had no front turn signals. Cut holes in the grill and mounted 2" LEDs. Cut off the factory light connectors, found turn signal wire with a test light, and connected to lights. Nothing has been right since. I have Leds in the rear, and with the fronts disconnected everything is good. Connect the fronts and w/one flasher they flash wat to fast, and with a special LED flasher they don't flash at all. Anyone with wiring diagrams or advice would be great. Thank you.
LED's
- Thread starter Rbknslyr
- Start date
Are the LEDs you added two or three wire lights? If they are two you need to run the wires from your side markers to them, if they are three just wire them to your front fender park/turn lights. LEDs will flash fast and you need to add a resistor to them. Go to this page and look for LED dummy load. http://www.watsons-streetworks.com/leds_plus.html
Badger
I am the Brute squad
- Location
- South Salt Lake
Technically you still need side markers/blinkers as well not just a front blinker.