Long brake hard line, where to get?

[1993yj]

Looking to replace the hard line that goes from my prop valve to my rear brakes. It looks like I need something about 84" long. All of the local auto stores (Napa, Auto Zone, etc.) only have up to 60". Any places where I could get a piece of 3/16" hard brake line that long?

 

[STAG]

Are you opposed to using a union coupler?

if so, I know that a lot of places sell brake line that is kind of rolled up and you straighten it before you put your required bends in it, comes in many lengths. I know a lot of people swear by it.

Heres one one I found on Google.
http://www.eastwood.com/stainless-b...=54067556847&gclid=CN6LoYmkn7wCFWUOOgodpiIAyw

 

[1993yj]

I would prefer not to use a union, less fittings less chances for leaks. I saw those rolled bundles too, am hoping to find something local though and get it done this week.

 

[carsonc1974]

i have always used the rolled stuff and straightened it out with a 2x4... Napa can get it... Probably not stainless though... Easy Peasy

 

[smartass_kid]

maybe check NPS? they seem to have lots of oddball stuff and might have what you're looking for. OR you can buy stuff you don't need, like I end up doing

 

[rockdog]

Have you tried evco? Maybe give em a call

 

[1993yj]

Unfortunately my previous visits to evco have resulted in them being less than willing to help me out with projects. I may try hose and rubber this afternoon as I have had good experiences there.