jallen9
Active Member
- Location
- Midland, TX
I have a winchester 9422 that seems to be malfunctioning and I'm looking for a gunsmith to fix it. I live just west of U of U. Does anyone know of a good gunsmith in that area?
Thanks
Thanks
looking for a gunsmith in the SLC area
- Thread starter jallen9
- Start date
jallen9
Active Member
- Location
- Midland, TX
awesome, i will. thanks.
Brian P
Misanthropic Fuel
- Location
- Taylorsville
I'm curious as to how it's malfunctioning? Not feeding, firing?
Tacoma
Et incurventur ante non
- Location
- far enough away
Whatshisname is a gunsmith too.. damnit, Matt Burg, runs No Quarter Gunsmithing: 3518 Barnfield way, West Valley City, Utah 84119 (801) 897-2480
Give him a call.
Give him a call.
Westernhunter
Active Member
Barlows. In West Valley
jallen9
Active Member
- Location
- Midland, TX
thanks for the suggestions. i'll call around.
It's not feeding properly, I don't know why. It's a lever action and there's a little arm that is supposed to lift the bullet so the action can push it into the chamber, but it falls of the arm and gets wedged inbetween the arm and the receiver.
It's not feeding properly, I don't know why. It's a lever action and there's a little arm that is supposed to lift the bullet so the action can push it into the chamber, but it falls of the arm and gets wedged inbetween the arm and the receiver.