Here I am again, I hope I am not to late, I was assuming that the wilwoods are all the same size and I was wrong, and after looking at the picture again, I am still wrong. Anyway after getting my hardware today the location of the mounting in the second picture with the blue slave is ideal. I included a pic ture with some lines
. It looks to be the same in the orginal picture but not as clear
On the tranny there is a bracing fin both horizontal and vertical. If the mounting point, for the stationary part of the slave was 1/2 inch then that would be ideal.
Let me know if that makes no sense.
Thanks again,
--Matt