Rubicon Express Tool - Looking for help
- Thread starter johnsonbz
- Start date
Xploderkid97
Registered User
- Location
- Highland
I bought one but returned it... turns out the "rubicon express" lowers I bought on ksl werent rubicon express... That being said, I had success on mine using 2 punch pins (harbor freight) and a leverage bar between them. I always kept mine nice and lubed so it did not take a lot of torque. Might be worth a shot if no one replies back.
I'll echo this. Did this same thing just a few weeks ago. Works like a charm.
filippelli
Active Member
- Location
- American Fork
I have both of them
Asbjorn
Active Member
- Location
- Montrose, CO
I made a tool using a small piece of flat strap and two bolts welded to it, set apart to fit two opposing holes in the adjustment nut. Welded a nut in the center on the other side of the flat strap to give me something to turn it with a wrench. Took me about 15 minutes to make and worked like a charm.
Thank you so much for the ideas. I think I will try the punch pins first. If that doesn't work, filippelli I will be contacting you 
filippelli
Active Member
- Location
- American Fork
Just let me know. I have my tools stored in my uncle's shop since all they do is collect dust now days. So I'll have to go get them