Sm 465 hydraulic clutch

[6.2Diesel]

I feel like this horse has been beat to death but I'm not finding adequate info on this, I know Novak sells a conversion kit, though that's only half of the conversion. I've talked to a few shops about it and they look at me like I've given them some sort of 90 page math assignment, has anyone done this conversion that can answer some questions, or does anyone know a shop that has the knowledge of doing the swap???

 

[B2-Bomber]

the only other half of it, is that you need to machine 1 of the bosses around the bellhousing bolt, to be the same height as the other boss. that's about it.

most of the time I just get a hydro bellhousing from a j/y, when you do that, you also need to use the hydro clutch fork, the auto parts stores sell them for like $20.00. you can then just use a stock slave cylinder, and get the pedals/master/line from a hydro gm truck.

 

[skiboarder]

I know where there are a couple of them. I'm not pulling them in this weather though.

 

[notajeep]

I ran a hydraulic slave cyl on my buggy. It was a pull instead of a push. Got it from summit I think. seems like it was $60ish.