who works on coilovers in Utah?

[sean_pistol]

I have a set of 16" Fox coilovers with remote reservoir. The line to the resi is too long and needs to be shortened so I can put it next to my coil bucket where my tires won't rub it. Who does this type of work near Salt Lake?

 

[Bart]

Release the nitrogen pressure to 0, undo the line being careful not to lay the shock down and spill any oil, and take the line to EVCO, or ??? and have a new one built to your specs. I'm going to have to do the same thing to mine this winter. You might want to check the pressure so you can match it when you add the new nitrogen after.

 

[sean_pistol]

Good idea. I've had EVCO build me custom motorcycle brakes lines and they're awesome.

EDIT: I called Fox. They said no matter what when you remove the line, you're letting air into the system. They would want to completely re-fill the shock with oil to do it properly. $100 per shock with line shortening as well.

 

[sean_pistol]

For the future, is there anyone that rebuilds coilovers in Salt Lake?

 

[jinxspot]

Mitch at Unlimited Fabrication (aka U-FAB), He's also a vendor on here. ;-)

http://www.rme4x4.com/showthread.php?90775-Unlimited-Fabrication-LLC