WTB Ford Super Duty Front/Rear stock springs

[patricklcam]

Looking for some take off Ford Super Duty front and rear springs for my new to me Diesel Excursion which has some serious spring sag.

Want front "V" code springs and rear "F" code springs, "B" might work for the rear as well.

Door pillar on driver's side gives spring codes. Late 99 to 04 SD 250/350 should work.

I plan on doing this swap here: http://www.supermotors.net/clubs/fordexcursions/registry/9/54681-2 for the front and http://www.supermotors.net/registry/6660/57634-2 for this rear.

Thanks in advance

 

[Maverick]

BTDT, you'll love it. I installed the V codes the first weekend I had the truck. I never had the part number... 2C3Z-5310-HA, I'm going to make sure I have V codes. They were already off the truck when I got them.

I've got some U codes that I picked up with the V codes if you want to experiment. I ended up installing add-a-leaves, but now it's a little too stiff. I ordered an adjustable track bar, hopefully that will help.

Rather than put the F or B's in the back, I installed Firestone Ride-Rite bags and a 7-gallon tank, so the back sits at whatever height I want, and rides pretty nice. I was going to add bags anyway, and it just didn't make sense to add springs and bags if bags would do the job.

If you go to the U4 Little Sahara service project thread, http://www.rme4x4.com/showthread.ph...roject-3-17-12-Little-Sahara-Sand-Dunes/page2 sixstring has a pic of my blue X when I was loading the jeep on post #68 . Bag psi was at 50psi, I typically run it a little higher when towing so that it sits level.

Brett

 

[patricklcam]

Thanks Brett for the U code offer but pretty much set on the "V/F" codes, seems like the best swap for me.

Your X looks good. Thanks for your ride-rite idea, forgot about those, I have them on an older Suburban and have been happy with them.

Pat