Yj spring conversion-shackle question

[Green-Tonka-CJ5]

So i came across these shackles on ebay, you wouldn't have to change the mounting point on the frame with these. Anyone have input about these being good, bad, or any concerns using these with a YJ spring being 1" longer? Thanks


http://cgi.ebay.com/ebaymotors/Jeep-CJ-YJ-Spring-Conversion-Shackles-5-RE2785-_W0QQcmdZViewItemQQhashZitem2ea46bf6faQQitemZ200327034618QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[I Lean]

No problems, those work great.

 

[Silly Willy]

I believe it equates to a .5" lift but I could be wrong.

 

[iamsparticus]

It didnt say the length but how long are your current shackles, At the Rad Jeeper i just did a full width axle swap on a CJ7 and we used the boomarang shackles and rubicon express springs, they seem to do great

 

[Green-Tonka-CJ5]

Not positive but i believe im running 4" of lift, and about the same length homemade shackles, i can measure later if needed

 

[cheepin]

It didnt say the length but how long are your current shackles, At the Rad Jeeper i just did a full width axle swap on a CJ7 and we used the boomarang shackles and rubicon express springs, they seem to do great

Yes it did.So this is 1" longer then stock and would give 1/2" lift.
Jeep CJ to YJ Spring Conversion Shackles 5" RE2785

 

[iamsparticus]

i was refering to his shackles now to figure out the lift thanks though