I appreciate all the feedback! I think i'm going to go with the #SK2XC Cable Shifter Assembly from Novak as i want to keep the stock shifter and it looks like its a pretty easy install with exception of removing the existing bracket from the transmission body. As we know its only two nuts but...
I'm hoping that someone will have some insight for me. I did a LS Swap with 4L60e to the stock 231 Transfer case. I have a 1" body lift and tried to use the drop plate however the linkage hits the screws and doesnt allow the shifter to engage 4Low. I see that t her are several types of cable...
Battery Suggestions - I'm guessing that this is going to be an easy question to answer but I'm going to put it out there anyway.
Because my swap took so long my battery is now dead. I was curious to know if I have the ability to run a new jeep battery for the '04 jeep OR will I need to change...
It took a lot of searching but I found the following part number. I've searched several distributors and looks to be discontinued. Looks like I'm gonna have to find a work around.
I'm needing help to identify the part number for the body bushings for the 4x4 shifter lever. I've done a lot of visual searches and coming up blank. Of the four, this is the only one that is still intact.
2004 LJ
So I found a fix for my issue. I appreciate ALL the help and suggestions. I ended up using a relay and tapping it into my original brake switch and the ECM. I also want to give a HUGE shout out to my friend Greg B and Charlie G for all the time and brain work that went into the swap.